Other Name: Motor - Window Regulator; Power Window Motor, Front Left, Rear Left, Rear Right; Motor; Motor Window Regulator; Power Window Motor; Window Regulator
Position: Rear Passenger Side
Replaces: 5056031AC
Item Weight: 2.10 Pounds
Item Dimensions: 10.5 x 5.2 x 3.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 5056031AD
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
Base, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
Other Name: Motor - Window Regulator; Power Window Motor, Rear Left; Motor Window Regulator With Screws; Power Window Motor; Window Motor
Position: Rear Driver Side
Item Weight: 2.30 Pounds
Item Dimensions: 10.4 x 5.5 x 3.2 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4724417AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
Base, GTC, JX, JXi, LX, LXi, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
2003 Chrysler Sebring Window Motor Parts and Q&A
Q: How to Maintain a Window Motor on 2003 Chrysler Sebring?
A: The first step is to cut off the negative battery connection to start working. Then, take out the window regulator and use a C clamp or equivalent on the gear of the sector to stop any unplanned movement as you remove the motor. Following the securement of the sector and mounting plate, get the motor off the regulator. When putting the motor gearbox in place, press it so that its teeth mesh with the regulator sector, since the installation holes may need to be aligned with a slight movement. After lining up the turbo, set the motor fasteners to 8 Nm (70 in. lbs.), then attach the regulator once more.