How to Remove and Install an Oxygen Sensor in the Exhaust Manifold on 2003 Chrysler Sebring?

The system has just 1 heated oxygen sensor mounted inside the exhaust manifold. Before you remove the upstream sensor, first unplug the negative battery cable, remove the electrical connector from the sensor and use a socket like Snap-On YA8875 or a crow foot wrench to take it out. For set up, brush the exhaust manifold threads using an 18 mm X 1.5 + 6E tap. Only put Loctite 771-64 anti-seize compound on the sensor threads if reusing the original; brand new sensors have a coat of compound already. Fasten the sensor to the exact torque of 28 Nm (20 ft. lbs.), insert the heated oxygen sensor plug and after that, begin installing the negative cable to the battery again.

OEM 2003 Chrysler Sebring Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Oxygen Sensors found

View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: 4606133AD
$91.13 MSRP: $191.00
You Save: $99.87 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 28.5 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606133AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: 4606555AB
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Sensor Oxygen
- Position: Front
- Item Weight: 0.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606555AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Rear Part Number: 4606135AD
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Sensor Oxygen
- Position: Rear
- Item Weight: 0.60 Pounds
- Item Dimensions: 16.3 x 1.0 x 1.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606135AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Rear Part Number: MR560365
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear; Rear Oxygen Sensor; Sensor Oxygen
- Position: Rear
- Item Weight: 0.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR560365
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: MR560364
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 3.6 x 1.3 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR560364
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, LX | 4 Cyl 2.4 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Rear Passenger Side Part Number: MR507387
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Rear, Rear Right; Sensor Oxygen
- Position: Rear Passenger Side
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR507387
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- LXi | 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: MR507386
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front Left; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR507386
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- LXi | 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: MR507385
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front Right; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR507385
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- LXi | 6 Cyl 3.0 L GAS
View related parts
2003 Chrysler Sebring Oxygen Sensor, Front Part Number: 4606555AD
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 18.2 x 2.1 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606555AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2003 Chrysler Sebring Oxygen Sensor Parts and Q&A

Q: How to Remove and Install an Oxygen Sensor in the Exhaust Manifold on 2003 Chrysler Sebring?
A: The system has just 1 heated oxygen sensor mounted inside the exhaust manifold. Before you remove the upstream sensor, first unplug the negative battery cable, remove the electrical connector from the sensor and use a socket like Snap-On YA8875 or a crow foot wrench to take it out. For set up, brush the exhaust manifold threads using an 18 mm X 1.5 + 6E tap. Only put Loctite 771-64 anti-seize compound on the sensor threads if reusing the original; brand new sensors have a coat of compound already. Fasten the sensor to the exact torque of 28 Nm (20 ft. lbs.), insert the heated oxygen sensor plug and after that, begin installing the negative cable to the battery again.