How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2003 Dodge Dakota?

The fuel pump relay is positioned inside the Power Distribution Center (PDC) and the cover of the PDC shows you where it is. First remove the PDC cover and then work on pulling out the relay from the PDC. Look over the relay terminals and PDC connection terminals to find any corrosion or damages, repair them and reinstall the relay afterward. Check the pin height on each terminal within the PDC connector to make sure it's even and repair any differences. To install, put the relay into the PDC and seal it with the cover.

OEM 2003 Dodge Dakota Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2003 Dodge Dakota Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Dakota Submodels:
- Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4, WS | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Dakota Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2003 Dodge Dakota?
A: The fuel pump relay is positioned inside the Power Distribution Center (PDC) and the cover of the PDC shows you where it is. First remove the PDC cover and then work on pulling out the relay from the PDC. Look over the relay terminals and PDC connection terminals to find any corrosion or damages, repair them and reinstall the relay afterward. Check the pin height on each terminal within the PDC connector to make sure it's even and repair any differences. To install, put the relay into the PDC and seal it with the cover.