How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2004 Dodge Dakota?

It is found within the Power Distribution Center (PDC). To remove the relay, first get rid of the cover over the motor and then remove it from the PDC. Look at the relay and PDC connector terminals to make sure there is no damage or corrosion and repair them if necessary; only install the relay after repairs are complete. Also, ensure that all pins have the same height within the PDC connector and repair them before instal Install the relay into the PDC first and then cover the PDC with its cover.

OEM 2004 Dodge Dakota Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2004 Dodge Dakota Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Dakota Submodels:
- Base, Big Horn, LE, Laramie, Lone Star, R/T, S, SLT, SLT Plus, ST, SXT, Sport, Sport Plus, TRX, TRX4, WS | 2.5L L4, 3.7L V6, 3.9L V6, 4 Cyl 2.5 L GAS, 4.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.9 L GAS

2004 Dodge Dakota Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2004 Dodge Dakota?
A: It is found within the Power Distribution Center (PDC). To remove the relay, first get rid of the cover over the motor and then remove it from the PDC. Look at the relay and PDC connector terminals to make sure there is no damage or corrosion and repair them if necessary; only install the relay after repairs are complete. Also, ensure that all pins have the same height within the PDC connector and repair them before instal Install the relay into the PDC first and then cover the PDC with its cover.