How to Replace the Air Bag Control Module in a Five-Passenger on 2003 Dodge Intrepid?

In order to change the Occupant Restraint Controller (ORC) on a five-passenger car, unconnect the negative battery cable, remove the required panels and screws, and unconnect the ORC connector. Install the new ORC, reconnect parts, and diagnose the airbag system then reconnect the battery cable.

OEM 2003 Dodge Intrepid Air Bag Control Module

SRS Airbag Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Control Modules found

View related parts
2003 Dodge Intrepid SDM Module Part Number: 4602406AB
$173.87 MSRP: $285.00
You Save: $111.13 (39%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Module - Air Bag Control; Air Bag Control Module; Diagnostic Unit
- Replaces: 4602406AA
- Item Weight: 1.20 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602406AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- ES, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Dodge Intrepid Control Module Part Number: 4602274AG
Product Specifications
- Other Name: Module - Air Bag Control; Side Sensor; Module; Module Air Bag Control
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 3.5 x 1.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4602274AG
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS

2003 Dodge Intrepid Air Bag Control Module Parts and Q&A

Q: How to Replace the Air Bag Control Module in a Five-Passenger on 2003 Dodge Intrepid?
A: In order to change the Occupant Restraint Controller (ORC) on a five-passenger car, unconnect the negative battery cable, remove the required panels and screws, and unconnect the ORC connector. Install the new ORC, reconnect parts, and diagnose the airbag system then reconnect the battery cable.