How to Remove and Install an Engine's Oxygen Sensor on 2003 Dodge Intrepid?

To remove the upstream heated oxygen sensor, disconnect the negative battery cable and the sensor's electrical connector. Use a socket or crow foot wrench for removal. Clean the threads, apply anti-seize if reusing, tighten to 28 N.m, reconnect the electrical connector, and reinstall the battery cable.

OEM 2003 Dodge Intrepid Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Oxygen Sensors found

View related parts
2003 Dodge Intrepid Oxygen Sensor, Front Part Number: 4606133AD
$91.13 MSRP: $191.00
You Save: $99.87 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Item Weight: 0.60 Pounds
- Item Dimensions: 1.3 x 28.5 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606133AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2003 Dodge Intrepid Oxygen Sensor Part Number: 4606555AA
Product Specifications
- Other Name: Sensor - Oxygen; Front Oxygen Sensor; Sensor Oxygen
- Item Weight: 5.60 Pounds
- Item Dimensions: 7.2 x 5.3 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4606555AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS

2003 Dodge Intrepid Oxygen Sensor Parts and Q&A

Q: How to Remove and Install an Engine's Oxygen Sensor on 2003 Dodge Intrepid?
A: To remove the upstream heated oxygen sensor, disconnect the negative battery cable and the sensor's electrical connector. Use a socket or crow foot wrench for removal. Clean the threads, apply anti-seize if reusing, tighten to 28 N.m, reconnect the electrical connector, and reinstall the battery cable.