How to Replace an Engine's Upstream Heated Oxygen Sensor on Dodge Intrepid?

The vehicle is fitted with two heated oxygen sensors, one in every exhaust manifold. Before replacing the upstream oxygen sensor, unhook the negative battery cable and then separate the connector for the heated oxygen sensor, being careful not to pull the wire that enters the sensor. Remove the oxygen sensor using a Snap-On YA8875 socket or a crow foot wrench. Once it is out, clean the threads inside the exhaust manifold with an 18 mm X 1.5 + 6E tap. If reusing a sensor, apply some anti-seize compound onto the sensor threads; these compounds are already applied to new sensors. Secure the heating sensor to 28 Nm (20 ft. lbs.), attach its electrical connector and then set back the negative cable on the battery.

How to Remove and Install an Engine's Oxygen Sensor on Dodge Intrepid?

Both exhaust manifolds have a heated oxygen sensor equipped onto the engine. Before disconnecting the upstream sensor, disconnect the negative battery cable and then carefully take off the wire connector of the heated oxygen sensor. To get the oxygen sensor out, use either a socket named Snap-On YA8875 or a crow foot wrench. Before installing, clean the exhaust manifold threads with an 18 mm x 1.5 + 6E tap after removing the sensor. When reusing the original sensor, smear an anti-seize compound like Loctite 771-64 on the sensor threads; newly purchased sensors are pre-treated. Turn the nut until you reach a torque of 28 N.m (20 ft.lbs.); then plug the electrical connector into the heated oxygen sensor and put back the negative battery cable.

OEM Dodge Intrepid Oxygen Sensor

Oxygen O2 Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Oxygen Sensors found

View related parts
Dodge Intrepid Oxygen Sensor, Front Part Number: 4606133AD
$91.13 MSRP: $191.00
You Save: $99.87 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2004 Dodge Intrepid | ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4606555AC
$108.11 MSRP: $141.34
You Save: $33.23 (24%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004 Dodge Intrepid | SE | 6 Cyl 2.7 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 5233088
$56.80 MSRP: $73.11
You Save: $16.31 (23%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen (Use Insulation 4209476), 4 Cylinder Engine; Sensor, Oxygen; Ambient Temperature Console.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Dodge Intrepid | Base, ES | 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4606061
$78.18 MSRP: $103.02
You Save: $24.84 (25%)
ADD TO CART
Product Specifications
- Other Name: Sensor - Exhaust Gas Oxygen Downstream; Sensor, Oxygen , (W/18" Pigtail) 3.5 Engine; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1997 Dodge Intrepid | Base, ES | 6 Cyl 3.3 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4605654
$51.23 MSRP: $64.95
You Save: $13.72 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen - Exhaust Gas; Sensor, Oxygen (Use Insulator 4604603, 3.3 Engine) Upstream; Sensor, Oxygen , (W/18" Pigtail) 3.5 Engine
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1993-1996 Dodge Intrepid | Base, ES | 6 Cyl 3.3 L FLEX, 6 Cyl 3.3 L GAS
View related parts
Dodge Intrepid Oxygen Sensor, Front Part Number: 4606133AE
$115.44 MSRP: $146.35
You Save: $30.91 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2000-2001 Dodge Intrepid | Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4606555AA
Product Specifications
- Other Name: Sensor - Oxygen; Front Oxygen Sensor; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002-2004 Dodge Intrepid | ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Dodge Intrepid Oxygen Sensor, Front Part Number: 4606133AC
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen Sensor, Front, Rear; Sensor Oxygen
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998-1999 Dodge Intrepid | Base, ES | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4606069
Product Specifications
- Other Name: Sensor - Oxygen Exhaust Gas Downstream; Sensor, Oxygen , (W/18" Pigtail) 3.5 Engine; Sensor Oxygen
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Dodge Intrepid | Base | 6 Cyl 3.3 L GAS
View related parts
Dodge Intrepid Oxygen Sensor Part Number: 4686154
Product Specifications
- Other Name: Sensor - Oxygen; Oxygen (Use Insulation 4209476), 4 Cylinder Engine; Oxygen Sensors for various engines.
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997 Dodge Intrepid | Base, ES | 6 Cyl 3.5 L GAS

Dodge Intrepid Oxygen Sensor

Choose OEM Oxygen Sensor that meet Dodge factory standards. Dodge designs and tests every component for precision and durability. Each Oxygen Sensor follows strict manufacturing steps to lock in quality and fit. If your Dodge Intrepid matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Intrepid parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

A Dodge Intrepid Oxygen Sensor functions as a crucial instrument which leads to improved Dodge Intrepid vehicle performance and efficiency. As a reliable sensor system the Oxygen Sensor tracks unburned oxygen content in engine exhaust to provide essential feedback to the engine control computer. Through its detection of fuel mixture balance the Dodge Intrepid Oxygen Sensor produces voltage feedback which enables optimal fuel control performance with reduced emissions levels. This device operates effectively on Dodge Intrepid vehicles no matter which type of sensor setup is installed from upstream to downstream positions. Its real-time adjustment capabilities alongside catalytic converter monitoring remain integral to the intended performance functions. A zirconium dioxide-based technology in Dodge Intrepid Oxygen Sensors provides high performance along with durability yet modern vehicles use advanced air/fuel ratio sensors to measure different ranges. The drive experience along with safety levels improve because of this efficiency emphasis which cuts down toxic emissions. Any the automaker model owner should recognize the car Oxygen Sensor as an important market standout because it maintains engine health alongside performance levels. The car Oxygen Sensor offers critical functionality by providing reliability with performance enhancement abilities and model compatibility.

Dodge Intrepid Oxygen Sensor Parts and Q&A

Oxygen Sensor, Front
4606133AD
Q: How to Replace an Engine's Upstream Heated Oxygen Sensor on Dodge Intrepid?
A:
The vehicle is fitted with two heated oxygen sensors, one in every Exhaust Manifold. Before replacing the upstream oxygen sensor, unhook the negative Battery Cable and then separate the connector for the heated oxygen sensor, being careful not to pull the wire that enters the sensor. Remove the oxygen sensor using a Snap-On YA8875 socket or a crow foot wrench. Once it is out, clean the threads inside the exhaust manifold with an 18 mm X 1.5 + 6E tap. If reusing a sensor, apply some anti-seize compound onto the sensor threads; these compounds are already applied to new sensors. Secure the heating sensor to 28 Nm (20 ft. lbs.), attach its electrical connector and then set back the negative cable on the battery.
Oxygen Sensor
4606555AC
Q: How to Remove and Install an Engine's Oxygen Sensor on Dodge Intrepid?
A:
Both Exhaust Manifolds have a heated oxygen sensor equipped onto the engine. Before disconnecting the upstream sensor, disconnect the negative Battery Cable and then carefully take off the wire connector of the heated oxygen sensor. To get the oxygen sensor out, use either a socket named Snap-On YA8875 or a crow foot wrench. Before installing, clean the exhaust manifold threads with an 18 mm x 1.5 + 6E tap after removing the sensor. When reusing the original sensor, smear an anti-seize compound like Loctite 771-64 on the sensor threads; newly purchased sensors are pre-treated. Turn the nut until you reach a torque of 28 N.m (20 ft.lbs.); then plug the electrical connector into the heated oxygen sensor and put back the negative battery cable.