How to Maintain a Power Window Switch on 2004 Dodge Neon?

To change the service the power window switch, you have to remove the battery negative cable. Use a trim stick to remove the window switch bezel, disconnect the wire connector, and remove the retaining screws. For installation, flip that and install the screws, reconnect the wire, insert the switch and reconnect the battery cable.

OEM 2004 Dodge Neon Power Window Switch

Electric Window Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Power Window Switches found

View related parts
2004 Dodge Neon Window Switch, Passenger Side Part Number: 4793859AA
$25.80 MSRP: $55.50
You Save: $29.70 (54%)
ADD TO CART
Product Specifications
- Other Name: Switch - Power Window; Door Window Switch, Right; Switch Power Window; Door Window Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.4 x 2.0 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793859AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
View related parts
2004 Dodge Neon Window Switch Part Number: 4793858AA
Product Specifications
- Other Name: Switch - Power Window; Switch Power Window
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.5 x 2.0 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793858AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Neon Submodels:
- ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS

2004 Dodge Neon Power Window Switch Parts and Q&A

Q: How to Maintain a Power Window Switch on 2004 Dodge Neon?
A: To change the service the power window switch, you have to remove the battery negative cable. Use a trim stick to remove the window switch bezel, disconnect the wire connector, and remove the retaining screws. For installation, flip that and install the screws, reconnect the wire, insert the switch and reconnect the battery cable.