How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2003 Dodge Ram 1500?

It is located in the Power Distribution Center (PDC) and labelled Fuel Pump Relay on the cover label. In order to get it out, remove the cover and the relay. Inspect the terminals of the relay, look at any damage or corrosion and fix it accordingly, and replace the relay and cover. Check the height of pin before installations.

OEM 2003 Dodge Ram 1500 Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2003 Dodge Ram 1500 Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Dodge Ram 1500 Submodels:
- Base, Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4, WS | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 5.9L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS

2003 Dodge Ram 1500 Fuel Pump Relay Parts and Q&A

Q: How to Locate, Remove, and Reinstall a Fuel Pump Relay on 2003 Dodge Ram 1500?
A: It is located in the Power Distribution Center (PDC) and labelled Fuel Pump Relay on the cover label. In order to get it out, remove the cover and the relay. Inspect the terminals of the relay, look at any damage or corrosion and fix it accordingly, and replace the relay and cover. Check the height of pin before installations.