JeepParts
My Garage
My Account
Cart
OEM 2003 Dodge Ram 3500 Van Door Lock Switch
- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Door Lock Switches found
2003 Dodge Ram 3500 Van Window Switch Part Number: 56045010AA
$18.40 MSRP: $23.69You Save: $5.29 (23%)Product Specifications- Other Name: Switch-1 Gang; Door Lock Switch; Lock Switch; Switch 1 Gang Door Lock & Power Window; Switch 1 Gang
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.1 x 3.1 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56045010AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2003 Dodge Ram 3500 Van Window Switch, Black Part Number: 56006897
Product Specifications- Other Name: Switch-2 Gang; Lock Switch; Window Lift, Right, Includes Black Bezel; 2 Gang Door Lock & Power Window Switch.
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.9 x 1.9 x 2.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56006897
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2003 Dodge Ram 3500 Van Door Lock Switch Parts and Q&A
- Q: How to service the power door lock switch on 2003 Dodge Ram 3500 Van?A: Before handling anything on the power door lock switch, disconnect the negative cable from the battery and isolate it. Unfasten the mirror flag trim bezel from the door's inside, then unscrew the back of the power window and power lock switch and mounting plate assembly to the bezel. Take out the power window and power lock switch, along with the mounted unit, from the bezel. Pick a small thin-bladed screwdriver, carefully wedge it into the snap clips by the switch on the back of the mounting plate, pull on the switch and take it out slowly. When installing, fit the power lock into the space on the back of the mounted switch and keep pressing until you hear it snap into place and the snap clips are secure. Attach the window and lock button, plus the plate unit behind the mirror flag bezel and tighten the screws evenly to 2 Nm (20 in. lbs.). After that, attach the mirror flag trim bezel to the front door's inner panel and plug back in the negative end of the battery connector.
Related 2003 Dodge Ram 3500 Van Parts
2003 Dodge Ram 3500 Van Door Handle
2003 Dodge Ram 3500 Van Door Hinge
2003 Dodge Ram 3500 Van Door Latch Assembly
2003 Dodge Ram 3500 Van Door Latch Cable
2003 Dodge Ram 3500 Van Door Lock Actuator
2003 Dodge Ram 3500 Van Door Lock Cylinder
2003 Dodge Ram 3500 Van Floor Pan
2003 Dodge Ram 3500 Van Grille
2003 Dodge Ram 3500 Van Rear Door Striker
2003 Dodge Ram 3500 Van Window Crank Handles
2003 Dodge Ram 3500 Van Window Regulator
2003 Dodge Ram 3500 Van Windshield