How to Maintain a Throttle Cable on 2003 Jeep Grand Cherokee?

To service throttle control cable, disassemble the cable by removing it out of the accelerator peddle and disconnection it off the dash panel. Take the cable to the engine compartment, unchange it to the throttle body and put it back with the reverse process. Lastly, when starting the engine, check the accelerator pedal whether it is binding or not.

OEM 2003 Jeep Grand Cherokee Throttle Cable

Accelerator Throttle Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Throttle Cables found

View related parts
2003 Jeep Grand Cherokee Throttle Cable Part Number: 4854150AB
$30.44 MSRP: $44.80
You Save: $14.36 (33%)
ADD TO CART
Product Specifications
- Other Name: Cable - Accelerator; Cable Accelerator
- Item Weight: 1.00 Pounds
- Item Dimensions: 16.6 x 17.0 x 0.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4854150AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Special Edition, Sport | 6 Cyl 4.0 L GAS
View related parts
2003 Jeep Grand Cherokee Throttle Cable Part Number: 4854061AD
Product Specifications
- Other Name: Cable - Accelerator; Cable Accelerator
- Replaces: 4854061AC
- Item Weight: 1.00 Pounds
- Item Dimensions: 11.4 x 11.6 x 1.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4854061AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Grand Cherokee Submodels:
- Laredo, Limited, Overland, Special Edition, Sport | 8 Cyl 4.7 L GAS

2003 Jeep Grand Cherokee Throttle Cable Parts and Q&A

Q: How to Maintain a Throttle Cable on 2003 Jeep Grand Cherokee?
A: To service throttle control cable, disassemble the cable by removing it out of the accelerator peddle and disconnection it off the dash panel. Take the cable to the engine compartment, unchange it to the throttle body and put it back with the reverse process. Lastly, when starting the engine, check the accelerator pedal whether it is binding or not.