How to Replace Car Speakers in the Front Door on 2003 Jeep Liberty?

Before putting in a new front door speaker, disconnect the battery negative cable. After that, take off the front door trim panel, as well as the screws holding the speakers in place. Take the speaker out of the door and pull out the connector wire that had attached to it. For installation, link the wire harness connector and attach the speaker to the door followed by installing the speaker screws and securing them to 2 Nm (20 in. lbs.). Afterwards, put the front door trim panel back and link the battery negative cable again.

OEM 2003 Jeep Liberty Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Car Speakers found

View related parts
2003 Jeep Liberty Speaker, Rear Outer Part Number: 56038800AB
Product Specifications
- Other Name: Speaker 6.5"
- Position: Rear Outer
- Item Weight: 2.30 Pounds
- Item Dimensions: 6.8 x 6.8 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56038800AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2003 Jeep Liberty Speaker, Front Inner Part Number: 56038815AB
Product Specifications
- Other Name: Speaker H - Tweeter; Speaker, Front Inner; Speaker Tweeter
- Position: Front Inner
- Item Weight: 1.30 Pounds
- Item Dimensions: 3.8 x 3.4 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56038815AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS
View related parts
2003 Jeep Liberty Rear Driver Speaker, Front Part Number: 56043268AA
Product Specifications
- Other Name: Speaker H; Speaker, Front, Front Outer, Rear, Rear Outer; Speaker; Speaker 6.5" Club Cab; Speaker 6.5"
- Position: Front
- Replaces: 56038408AC
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56043268AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- Limited, Renegade, Sport | 4 Cyl 2.4 L GAS, 6 Cyl 3.7 L GAS
View related parts
2003 Jeep Liberty Speaker, Front Inner Part Number: 56010666AC
Product Specifications
- Other Name: Speaker H - Tweeter; Speaker, Front Inner
- Position: Front Inner
- Replaces: 56038612AB, 56010666AB
- Item Weight: 0.70 Pounds
- Item Dimensions: 2.9 x 3.0 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 56010666AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Sport | 2.4L L4, 3.7L V6, 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2003 Jeep Liberty Car Speakers Parts and Q&A

Q: How to Replace Car Speakers in the Front Door on 2003 Jeep Liberty?
A: Before putting in a new front door speaker, disconnect the battery negative cable. After that, take off the front door trim panel, as well as the screws holding the speakers in place. Take the speaker out of the door and pull out the connector wire that had attached to it. For installation, link the wire harness connector and attach the speaker to the door followed by installing the speaker screws and securing them to 2 Nm (20 in. lbs.). Afterwards, put the front door trim panel back and link the battery negative cable again.