How to Properly Maintain a Pilot Bearing in a 2003 Jeep Liberty?

In order to service pilot bearing, take out the transmission, pressure plate and the clutch disc. To remove the bearing, a puller is used, and the new bearing should be lubricated with a high-temperature grease. Assemble manually and with a clutch adjusting tool. Clean and scuff the flywheel, put the transmission and the clutch back in.

OEM 2003 Jeep Liberty Pilot Bearing

Clutch Pilot Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Pilot Bearings found

View related parts
2003 Jeep Liberty Pilot Bearing Part Number: 53009180AB
$32.31 MSRP: $42.00
You Save: $9.69 (24%)
ADD TO CART
Product Specifications
- Other Name: Sleeve - Pilot; Multi-Purpose Bearing; Needle Bearing; Pilot Bearings; Bearing Pilot For 2.5 Engine, Serviced In Flywheel; Bearing Pilot Manual Transmission; Bearing Pilot
- Replaces: 53009180
- Item Weight: 0.70 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53009180AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 6 Cyl 3.7 L GAS
View related parts
2003 Jeep Liberty Pilot Bearing Part Number: 52104337AA
Product Specifications
- Other Name: Sleeve - Pilot; Pilot Bearings; Bearing Pilot
- Item Weight: 0.60 Pounds
- Item Dimensions: 2.1 x 2.0 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52104337AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2003 Jeep Liberty Submodels:
- Sport | 4 Cyl 2.4 L GAS

2003 Jeep Liberty Pilot Bearing Parts and Q&A

Q: How to Properly Maintain a Pilot Bearing in a 2003 Jeep Liberty?
A: In order to service pilot bearing, take out the transmission, pressure plate and the clutch disc. To remove the bearing, a puller is used, and the new bearing should be lubricated with a high-temperature grease. Assemble manually and with a clutch adjusting tool. Clean and scuff the flywheel, put the transmission and the clutch back in.