How to Maintain a Seat Heater Switch on 2004 Chrysler Pacifica?

The first step is to disconnect and isolate the negative terminal of the car's battery. After that, follow the right steps to take off the front door trim panel. Untie the harness between the door module and the seat, then press in the four clips to remove the heated seat switch. Install the heated seat switch wiring assembly and then connect the harness to the door module. Correctly put back the front door trim panel and then reconnect the battery negative cable.

OEM 2004 Chrysler Pacifica Seat Heater Switch

Seat Heater Level Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Seat Heater Switches found

View related parts
2004 Chrysler Pacifica Seat Switch, Passenger Side Part Number: UF24XDVAA
$5.51 MSRP: $6.98
You Save: $1.47 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch - Heated Seat; Seat Heater Switch, Right; Switch; Switch Heated Seat; Seat Heater Switch
- Position: Passenger Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF24XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS
View related parts
2004 Chrysler Pacifica Seat Switch, Driver Side Part Number: UF25XDVAA
Product Specifications
- Other Name: Switch; Seat Heater Switch, Left; Switch Heated Seat; Seat Heater Switch
- Position: Driver Side
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: UF25XDVAA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, LX, Limited, Touring | 6 Cyl 3.5 L GAS, 6 Cyl 3.8 L GAS, 6 Cyl 4.0 L GAS

2004 Chrysler Pacifica Seat Heater Switch Parts and Q&A

Q: How to Maintain a Seat Heater Switch on 2004 Chrysler Pacifica?
A: The first step is to disconnect and isolate the negative terminal of the car's battery. After that, follow the right steps to take off the front door trim panel. Untie the harness between the door module and the seat, then press in the four clips to remove the heated seat switch. Install the heated seat switch wiring assembly and then connect the harness to the door module. Correctly put back the front door trim panel and then reconnect the battery negative cable.