How to Service and Repair a MAP Sensor on 2004 Chrysler Pacifica?

The first step in Manifold Pressure/Vacuum Sensor service and repair is disconnecting the negative battery cable. Afterward, take off the electrical connector next to the MAP sensor and remove the screw that holds it in place before pulling the sensor out. While installing, first insert the MAP Sensor O-ring and secure the sensor to the intake manifold. The screws should be tightened to 4.5 N-m (40 in. lbs.) torque. Secure the sensor, fit the electric connector and place the negative battery cable back into its place.

OEM 2004 Chrysler Pacifica MAP Sensor

Manifold Air Pressure Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 MAP Sensor found

View related parts
2004 Chrysler Pacifica M.A.P. Sensor Part Number: 4896003AB
Product Specifications
- Other Name: Sensor - Map; Manifold Absolute Pressure Sensor; Manifold Sensor; MAP Sensor; Sensor Map; Pressure Sensor
- Replaces: 4896003AA, 4896002AD
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896003AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 3.5L V6, 6 Cyl 3.5 L GAS

2004 Chrysler Pacifica MAP Sensor Parts and Q&A

Q: How to Service and Repair a MAP Sensor on 2004 Chrysler Pacifica?
A: The first step in Manifold Pressure/Vacuum Sensor service and repair is disconnecting the negative battery cable. Afterward, take off the electrical connector next to the MAP sensor and remove the screw that holds it in place before pulling the sensor out. While installing, first insert the MAP Sensor O-ring and secure the sensor to the intake manifold. The screws should be tightened to 4.5 N-m (40 in. lbs.) torque. Secure the sensor, fit the electric connector and place the negative battery cable back into its place.