JeepParts
My Garage
My Account
Cart
OEM 2004 Chrysler PT Cruiser Cigarette Lighter
Car Cigarette Lighter- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
2 Cigarette Lighters found
2004 Chrysler PT Cruiser Power Outlet, Center Part Number: 4793554AC
$24.35 MSRP: $36.05You Save: $11.70 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Lighter; 12 Volt Accessory Power Outlets: Rear Right, Rear Left, Center, Front, Rear; Housing; Cigarette Lighter Socket.; Power Outlet Mount; Armrest Outlet; Power Outlet Cigar; Power Outlet Power
- Position: Center
- Replaces: 4793554AB
- Item Weight: 0.40 Pounds
- Item Dimensions: 6.2 x 4.2 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4793554AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Chrysler PT Cruiser Power Outlet, Front Part Number: 4685590
$26.67 MSRP: $39.45You Save: $12.78 (33%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Outlet; 12 Volt Accessory Power Outlet Housing, Front; Center; Cigarette Lighter Socket.; Lighter Socket; Power Outlet Base; Cigar Lighter Base; Serviced Without Cap.
- Position: Front
- Replaces: 4685590AB, 5026362AA, 6AL38DX9AA, 6AL38LXHAA
- Item Weight: 0.50 Pounds
- Item Dimensions: 6.1 x 4.1 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685590
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Chrysler PT Cruiser Cigarette Lighter Parts and Q&A
- Q: How to Remove and Install the Cigarette Lighter in the Rear Cargo Area on 2004 Chrysler PT Cruiser?A: In the boot, the power socket is hooked up to ground, with an insulated connection taking battery voltage from a fuse in the Power Distribution Center via a fuse in the fuse block when the ignition is set to ON or ACC. Before getting rid of the cigar lighter/power outlet base, first make sure the car battery negative cable is disconnected and clean of any contaminants. Notice where the retaining bosses are located in the outlet. Using external snap ring pliers with 90-degree tips, push them against the bosses and squeeze to take them out of the base. Remove the base by rotating the pliers around the mounting ring or use a fitted tool meant for pulling the base. Undo the base wires, take the base off to the side and remove the base mount ring. Place the ring on the instrument panel and lead the wires through it. The cap and the ring must be in the correct position at 9 o'clock with the tab lined up to the key in the instrument panel, before you fit them with the ring. Match the base alignment rib which is at 11 o'clock, with the groove in the mount ring at the same place. Move the base down into the bezel, maintain pressure until it locks, put on the cigar lighter cap and restart the battery negative lead.
Related 2004 Chrysler PT Cruiser Parts
2004 Chrysler PT Cruiser Ashtray
2004 Chrysler PT Cruiser Door Check
2004 Chrysler PT Cruiser Door Handle
2004 Chrysler PT Cruiser Door Hinge
2004 Chrysler PT Cruiser Door Latch Assembly
2004 Chrysler PT Cruiser Door Lock Actuator
2004 Chrysler PT Cruiser Instrument Cluster
2004 Chrysler PT Cruiser Shift Indicator
2004 Chrysler PT Cruiser Shift Knob
2004 Chrysler PT Cruiser Speedometer
2004 Chrysler PT Cruiser Window Regulator
2004 Chrysler PT Cruiser Windshield Wiper