How to Service Car Speakers in the Front Door on 2004 Dodge Durango?

It is necessary to unhook and isolate the battery negative cable while working on the front door speaker. Come next, pull the front door trim panel out and unfasten all the components and then detach the speaker and the connector for the wiring harness. Join the electrical harness connector, put the speaker in the door, then install and fasten the mounting bolts. Now, put back the door trim panel and securely fasten the battery negative cable to the running board.

OEM 2004 Dodge Durango Car Speakers

Audio Speakers

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Car Speakers found

View related parts
2004 Dodge Durango Rear Driver Speaker, Outer Part Number: 5082451AC
Product Specifications
- Other Name: Speaker H; Speaker, Front Outer, Rear, Rear Outer; Speaker; Speaker 6.5" Rear Door; Speaker 6.5" 6.5 Base; Speaker 6.5"
- Position: Rear Outer
- Item Weight: 1.60 Pounds
- Item Dimensions: 6.8 x 6.9 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5082451AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Woofer Part Number: 4685972AB
Product Specifications
- Other Name: Speaker - Sub Woofer; Speaker; Speaker Sub Woofer
- Item Weight: 5.70 Pounds
- Item Dimensions: 10.7 x 10.7 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4685972AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2004 Dodge Durango Car Speakers Parts and Q&A

Q: How to Service Car Speakers in the Front Door on 2004 Dodge Durango?
A: It is necessary to unhook and isolate the battery negative cable while working on the front door speaker. Come next, pull the front door trim panel out and unfasten all the components and then detach the speaker and the connector for the wiring harness. Join the electrical harness connector, put the speaker in the door, then install and fasten the mounting bolts. Now, put back the door trim panel and securely fasten the battery negative cable to the running board.