How to Replace a Windshield Washer Nozzle on 2004 Dodge Durango?

Damage will be done to the rear windshield washer nozzle if it is taken out of its place, so if it is removed at all, it has to be replaced with a new unit. With a gentle pry at the underside of the nozzle, separate the latch holding it in the rear of the liftgate. Pull the nozzle just far enough to expose the hose on the washer and pull the hose out of the hole on the back of the nozzle, then throw away the nozzle. When mounting, place the new nozzle inside the hold in the outer panel of the liftgate, confirming that the rubber gasket is at the top of the nozzle. Clip the washer hose onto the barbed nipple at the back of the nozzle and insert the hose and nipple into the mounting hole, then push the tab on the nipple up into the hole until it clicks. After that, use your hands to press the edge of the nozzle until it snaps onto the bottle.

OEM 2004 Dodge Durango Windshield Washer Nozzle

Front Windshield Washer Nozzle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Windshield Washer Nozzles found

View related parts
2004 Dodge Durango Nozzle, Front Part Number: 55077460AA
$35.94 MSRP: $53.30
You Save: $17.36 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Nozzle - Windshield Washer; Windshield Washer Nozzle, Front; Back Glass Washer Nozzle, Rear; Nozzle Windshield Washer
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.9 x 1.1 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55077460AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Durango Washer Nozzle, Rear Part Number: 55156158AE
Product Specifications
- Other Name: Nozzle - Liftgate Washer; Back Glass Washer Nozzle, Rear; Nozzle; Nozzle Windshield Washer; Nozzle Liftgate Washer; Nozzle Rear Washer
- Position: Rear
- Replaces: 55156158AD, 55156158AC
- Item Weight: 0.40 Pounds
- Item Dimensions: 1.7 x 1.1 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 55156158AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Durango Submodels:
- Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2004 Dodge Durango Windshield Washer Nozzle Parts and Q&A

Q: How to Replace a Windshield Washer Nozzle on 2004 Dodge Durango?
A: Damage will be done to the rear windshield washer nozzle if it is taken out of its place, so if it is removed at all, it has to be replaced with a new unit. With a gentle pry at the underside of the nozzle, separate the latch holding it in the rear of the liftgate. Pull the nozzle just far enough to expose the hose on the washer and pull the hose out of the hole on the back of the nozzle, then throw away the nozzle. When mounting, place the new nozzle inside the hold in the outer panel of the liftgate, confirming that the rubber gasket is at the top of the nozzle. Clip the washer hose onto the barbed nipple at the back of the nozzle and insert the hose and nipple into the mounting hole, then push the tab on the nipple up into the hole until it clicks. After that, use your hands to press the edge of the nozzle until it snaps onto the bottle.