How to Service and Repair the Right Engine Mount on 2004 Dodge Intrepid?

You should begin by lifting the car on a hoist and taking off the nuts from the top of the isolator attaching to the mount. After you have raised the car and placed a block of wood across the whole oil pan, undo the nuts connecting the isolator to the frame. Raise only the engine with the jack until you can easily remove the isolator with its heat shield from its mount. To install, place the mount with the heat shield onto the seat post and bring the crank assembly down to sit on the isolator mount. When the jack is gone, tighten the isolator to frame bolts to 61 Nm (45 ft. lbs.) and put the upper bolts on the mount, also tightening them to 61 Nm (45 ft. lbs.). Lower the vehicle as the last step.

OEM 2004 Dodge Intrepid Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Engine Mounts found

View related parts
2004 Dodge Intrepid Front Mount, Driver Side Part Number: 4593287AB
$27.86 MSRP: $160.00
You Save: $132.14 (83%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Left; Engine Mount Torque Strut; Engine Mount Bracket; Motor Mount; Front Insulator; Mount
- Position: Driver Side
- Item Weight: 4.70 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593287AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Mounting Bracket, Passenger Side Part Number: 4593182
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 2.20 Pounds
- Item Dimensions: 10.3 x 10.6 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593182
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Front Mount, Passenger Side Part Number: 4593184AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Right, Right; Engine Mount Bracket; Motor Mount; Mount
- Position: Passenger Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 5.4 x 4.5 x 4.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593184AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, Police, R/T, SE, SXT | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Front Mount, Driver Side Part Number: 4593285AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount, Front, Front Left, Left; Engine Mount Bracket; Motor Mount; Mount
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593285AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, R/T, SE | 6 Cyl 2.7 L GAS, 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Mounting Bracket, Driver Side Part Number: 4593245
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593245
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Intrepid Submodels:
- ES, Police, R/T, SE, SXT | 6 Cyl 3.2 L GAS, 6 Cyl 3.5 L GAS
View related parts
2004 Dodge Intrepid Mount Bracket, Passenger Side Part Number: 4593244
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593244
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS
View related parts
2004 Dodge Intrepid Mount Bracket, Driver Side Part Number: 4593243
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount Torque Strut; Motor Mount; Front Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 1.40 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593243
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Intrepid Submodels:
- Base, ES, SE | 6 Cyl 2.7 L GAS

2004 Dodge Intrepid Engine Mount Parts and Q&A

Q: How to Service and Repair the Right Engine Mount on 2004 Dodge Intrepid?
A: You should begin by lifting the car on a hoist and taking off the nuts from the top of the isolator attaching to the mount. After you have raised the car and placed a block of wood across the whole oil pan, undo the nuts connecting the isolator to the frame. Raise only the engine with the jack until you can easily remove the isolator with its heat shield from its mount. To install, place the mount with the heat shield onto the seat post and bring the crank assembly down to sit on the isolator mount. When the jack is gone, tighten the isolator to frame bolts to 61 Nm (45 ft. lbs.) and put the upper bolts on the mount, also tightening them to 61 Nm (45 ft. lbs.). Lower the vehicle as the last step.