Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Passenger Side
Replaces: 55362212AB
Item Weight: 1.40 Pounds
Item Dimensions: 9.2 x 8.2 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55276882AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Passenger Side
Item Weight: 1.30 Pounds
Item Dimensions: 10.6 x 3.3 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275948AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: 55362213AB
Item Weight: 1.40 Pounds
Item Dimensions: 9.3 x 8.3 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275949AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2004 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
2004 Dodge Ram 1500 Door Handle Parts and Q&A
Q: How to Service and Repair a Rear Door Handle Actuator on 2004 Dodge Ram 1500?
A: Take out the door trim panel before you work on the rear door interior handle. Later, remove the waterdam so you can disconnect the actuator rod from its connection with the interior door handle actuator. Take out the two bolts holding the actuator to the door and unmount the actuator. To set up the interior actuator, secure it to the door and tighten the two bolts to the right torque: 10 N.m (89 in.lbs.). Fit the rod from the actuator inside the interior door handle, move the waterdam back into place and put on the door trim panel.