Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Passenger Side
Replaces: 55362212AB
Item Weight: 1.40 Pounds
Item Dimensions: 9.2 x 8.2 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55276882AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Right Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Passenger Side
Item Weight: 1.30 Pounds
Item Dimensions: 10.6 x 3.3 x 2.7 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275948AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
Other Name: Handle - Front Door Exterior; Exterior Door Handle, Front Left Outer; Outside Door Handle; Handle Front Door Exterior; Exterior Door Handle
Position: Front Outer Driver Side
Replaces: 55362213AB
Item Weight: 1.40 Pounds
Item Dimensions: 9.3 x 8.3 x 3.8 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55275949AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4 | 10 Cyl 8.3 L GAS, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS
2005 Dodge Ram 1500 Door Handle Parts and Q&A
Q: How to Maintain a Rear Door Handle on 2005 Dodge Ram 1500?
A: Before handling the rear exterior door handle, get rid of the front glass run channel. Following that, remove the actuator rod from the exterior door handle. Then, take out the nuts that hold the door handle to the door and then remove the handle. To attach the handle from the outside, place it in the door and fix the two nuts, tightening both to 10 N.m (89 in.lbs.). Attach the actuator rod to the exterior handle after that and fit the front glass channel back into its place.