How to Service and Repair a Rear Engine Mount on 2004 Dodge Ram 2500?

Begin by raising the car and putting the transmission jack under the engine near the rear axle. After uncasing the stud nuts, lift the rear of the transmission and engine a little bit. Then, release the bolts holding the support cushion to the transmission support bracket and take out the cushion. In some cases, you will need to take off the bolts that hold the transmission support bracket to the transmission. When you install the transmission, if the bracket was taken off, set it onto the transmission, put in new attaching bolts and tighten them to 102 Nm (75 ft. lbs.) torque. After that, put the support cushion on the transmission support bracket, attach the stud nuts and tighten them to 47 Nm (35 ft. lbs. With the transmission jack, place the transmission and support cushion on the crossmember, put in the bolts and tighten them to 47 Nm (35 ft. lbs.). Lastly, remove the transmission jack so the car can be lowered.

OEM 2004 Dodge Ram 2500 Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

11 Engine Mounts found

View related parts
2004 Dodge Ram 2500 Transmission Mount Part Number: 52021470AD
$81.34 MSRP: $124.00
You Save: $42.66 (35%)
ADD TO CART
Product Specifications
- Other Name: Insulator - Transmission Support; Automatic & Manual Transmission Mounts; Engine & Transfer Case Mount; Motor Mount; Transmission Mount Bracket; Rear Mount
- Replaces: 52021470AC, 52021470AB
- Item Weight: 4.00 Pounds
- Item Dimensions: 3.8 x 4.2 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021470AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 5.7L V8, 5.9L L6, 6 Cyl 5.9 L DIESEL, 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Motor Mount Part Number: 52021713AB
$113.42 MSRP: $171.00
You Save: $57.58 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount
- Replaces: 52021713AA
- Item Weight: 2.60 Pounds
- Item Dimensions: 3.4 x 4.1 x 6.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021713AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Motor Mount, Passenger Side Part Number: 52020604AD
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount, Right; Engine Mount Bracket; Front Mount; Insulator Engine Mount
- Position: Passenger Side
- Replaces: 52020604AC, 52020604AB
- Item Weight: 10.00 Pounds
- Item Dimensions: 3.3 x 4.8 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020604AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Motor Mount Part Number: 52021712AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Front Mount; Mount Insulator; Insulator Engine Mount
- Item Weight: 2.50 Pounds
- Item Dimensions: 3.4 x 4.0 x 6.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021712AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 10 Cyl 8.0 L GAS, 6 Cyl 5.9 L DIESEL
View related parts
2004 Dodge Ram 2500 Mount Bracket, Driver Side Part Number: 52021163AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Item Weight: 2.10 Pounds
- Item Dimensions: 5.6 x 7.4 x 5.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021163AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Mount Bracket, Driver Side Part Number: 52021139AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021139AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Mount Bracket, Passenger Side Part Number: 52021138AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021138AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, Power Wagon, SLT, ST, Sport, TRX4 | 8 Cyl 5.7 L GAS
View related parts
2004 Dodge Ram 2500 Mount Bracket, Driver Side Part Number: 52021137AA
Product Specifications
- Other Name: Cushion - Engine Support; Engine Mount Bracket, Left; Engine Mount, Left; Motor Mount; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021137AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 6 Cyl 5.9 L DIESEL
View related parts
2004 Dodge Ram 2500 Motor Mount, Passenger Side Part Number: 52021136AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Right; Engine Mount, Right; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Passenger Side
- Item Weight: 4.20 Pounds
- Item Dimensions: 6.4 x 5.7 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021136AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2004 Dodge Ram 2500 Motor Mount, Driver Side Part Number: 52021135AA
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket, Left; Engine Mount, Left; Mount Bracket; Bracket Engine Mount; Engine Mount Bracket
- Position: Driver Side
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52021135AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2004 Dodge Ram 2500 Motor Mount, Driver Side Part Number: 52020605AC
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount, Left; Engine Mount Bracket; Front Mount; Insulator Engine Mount
- Position: Driver Side
- Replaces: 52020605AB
- Item Weight: 8.10 Pounds
- Item Dimensions: 7.1 x 5.8 x 5.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 52020605AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 2500 Submodels:
- Laramie, SLT, ST | 8 Cyl 5.7 L GAS

2004 Dodge Ram 2500 Engine Mount Parts and Q&A

Q: How to Service and Repair a Rear Engine Mount on 2004 Dodge Ram 2500?
A: Begin by raising the car and putting the transmission jack under the engine near the rear axle. After uncasing the stud nuts, lift the rear of the transmission and engine a little bit. Then, release the bolts holding the support cushion to the transmission support bracket and take out the cushion. In some cases, you will need to take off the bolts that hold the transmission support bracket to the transmission. When you install the transmission, if the bracket was taken off, set it onto the transmission, put in new attaching bolts and tighten them to 102 Nm (75 ft. lbs.) torque. After that, put the support cushion on the transmission support bracket, attach the stud nuts and tighten them to 47 Nm (35 ft. lbs. With the transmission jack, place the transmission and support cushion on the crossmember, put in the bolts and tighten them to 47 Nm (35 ft. lbs.). Lastly, remove the transmission jack so the car can be lowered.