How to Remove and Install a Canister Purge Valve on 2004 Dodge Ram 3500?

To remove the duty cycle EVAP canister purge valve from its mount bracket, the electrical wiring connector, then the vacuum harness, need to be disconnected on the valve which is located in the engine compartment, attached to the side of the Power Distribution Center (PDC). To install, the valve assembly should be bolted to the bracket then vacuum harness and electrical connector reconnected.

OEM 2004 Dodge Ram 3500 Canister Purge Valve

Vapor Canister Purge Valve EVAP

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Canister Purge Valve found

View related parts
2004 Dodge Ram 3500 Purge Valve Part Number: 4669569
Product Specifications
- Other Name: Solenoid - Proportional Purge; Vapor Canister Purge Solenoid; Purge Solenoid; EGR Solenoid; Proportional and Linear Purge Solenoids.
- Item Weight: 1.00 Pounds
- Item Dimensions: 2.6 x 3.5 x 3.7 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4669569
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, Sport | 8 Cyl 5.7 L GAS

2004 Dodge Ram 3500 Canister Purge Valve Parts and Q&A

Q: How to Remove and Install a Canister Purge Valve on 2004 Dodge Ram 3500?
A: To remove the duty cycle EVAP canister purge valve from its mount bracket, the electrical wiring connector, then the vacuum harness, need to be disconnected on the valve which is located in the engine compartment, attached to the side of the Power Distribution Center (PDC). To install, the valve assembly should be bolted to the bracket then vacuum harness and electrical connector reconnected.