How to Service the Rear Door Check on 2004 Dodge Sprinter 2500?

To service the rear door check, open the door and disengage the check arm. Remove the check arm screws and d-pillar trim if present. Take out the receiver by removing rivets. For installation, reverse the steps, tightening screws to 10 N.m (89 in.lbs.).

OEM 2004 Dodge Sprinter 2500 Door Check

Front Door Check Strap

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Checks found

View related parts
2004 Dodge Sprinter 2500 Door Check, Front Driver Side Part Number: 5104335AA
$83.52 MSRP: $105.87
You Save: $22.35 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Check - Front Door; Door Check, Front Left; Check Front Door
- Position: Front Driver Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 5.7 x 5.8 x 2.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104335AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2004 Dodge Sprinter 2500 Door Check, Front Passenger Side Part Number: 5104338AA
$94.65 MSRP: $119.99
You Save: $25.34 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Check - Front Door; Door Check, Front Right; Check Front Door
- Position: Front Passenger Side
- Item Weight: 1.40 Pounds
- Item Dimensions: 7.2 x 5.5 x 2.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5104338AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2004 Dodge Sprinter 2500 Door Check Parts and Q&A

Q: How to Service the Rear Door Check on 2004 Dodge Sprinter 2500?
A: To service the rear door check, open the door and disengage the check arm. Remove the check arm screws and d-pillar trim if present. Take out the receiver by removing rivets. For installation, reverse the steps, tightening screws to 10 N.m (89 in.lbs.).