JeepParts
My Garage
My Account
Cart
OEM 2004 Dodge Stratus Throttle Body
Fuel Injection Throttle Body- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
4 Throttle Bodies found
2004 Dodge Stratus Throttle Body Part Number: MD357272
Product Specifications- Other Name: Throttle Body Package
- Item Weight: 4.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD357272
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Stratus Throttle Body Part Number: 5103106AA
Product Specifications- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103106AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Stratus Throttle Body Part Number: 5103103AA
Product Specifications- Item Weight: 2.10 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5103103AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Stratus Throttle Body Part Number: 5096293AA
Product Specifications- Item Weight: 1.60 Pounds
- Item Dimensions: 12.2 x 9.5 x 4.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5096293AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
2004 Dodge Stratus Throttle Body Parts and Q&A
- Q: How to Service and Repair a Throttle Body on a 4-Cylinder Engine on 2004 Dodge Stratus?A: You should first turn off the battery's negative terminal when working on a 4-cylinder engine throttle body. Lift out the air filter hose, lift off the throttle cable shield and separate the cables from the lever and the bracket. Take off the electrical cables from the idle air control motor and throttle position sensor. After that, disconnect the throttle body by taking off the bolts and the bracket for the throttle cable. When installing, put the throttle body at the proper place and fasten it with the bolts at 13.6 Nm (120 in. lbs.) torque. Connect the throttle cable bracket, then fasten its mounting bolts to 14.1 Nm (125 in. lbs.) tightness. Throttle the engine wide open before you install the throttle and speed control cables onto the engine. Attach the connectors again to both the idle air control motor and throttle position sensor and then place back the throttle cable shield and clean air hose. Afterward, link the negative cable back to the battery.
Related 2004 Dodge Stratus Parts
2004 Dodge Stratus Fuel Pump
2004 Dodge Stratus Intake Manifold
2004 Dodge Stratus Accelerator Cable
2004 Dodge Stratus Air Filter
2004 Dodge Stratus Air Filter Box
2004 Dodge Stratus Cruise Control Switch
2004 Dodge Stratus Fuel Injector
2004 Dodge Stratus Fuel Injector Seal
2004 Dodge Stratus Fuel Sending Unit
2004 Dodge Stratus Gas Cap
2004 Dodge Stratus Intake Manifold Gasket
2004 Dodge Stratus Throttle Body Gasket