How to service an Air Bag Sensor in the C-Pillar on 2005 Chrysler 300?

Before touching the C-pillar mounted side impact sensor, first cut off and isolate the battery negative cable to wait a couple of minutes for the air bag system reserve capacitor to discharge which will help protect you from accidental air bag activation. After that, pull off the C-pillar trim panel, disconnect connector 3 and remove the two screws 2. When attaching the unit, fix the C-pillar mounted impact sensor in place and install the two body mounting screws 2 firmly, tightening them to 7 N.m (62 in.lbs.) After that, refit the electrical connector 3 and clip on the C-pillar trim panel again. Do not connect the battery negative cable until testing the system to avoid any chance of personal injury or death.

OEM 2005 Chrysler 300 Air Bag Sensor

Air Bag Impact Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Air Bag Sensors found

View related parts
2005 Chrysler 300 Impact Sensor, Front Part Number: 4896173AA
$208.47 MSRP: $307.00
You Save: $98.53 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Front; Air Bag Sensor; Front Impact Sensor; Front Sensor; Side Impact Sensor; Sensor Side Airbag Impact; Sensor Impact
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.7 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4896173AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS
View related parts
2005 Chrysler 300 Impact Sensor, Front Part Number: 4671779AC
$52.84 MSRP: $114.00
You Save: $61.16 (54%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor - Impact; Air Bag Impact Sensor, Center, Front; Air Bag Sensor; Front Impact Sensor; Side Impact Sensor; Airbag Impact Sensor.
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.8 x 2.6 x 3.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4671779AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler 300 Submodels:
- Base, C, C SRT8, LX, Limited, S, Signature Series, Touring | 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 6.1 L GAS

2005 Chrysler 300 Air Bag Sensor Parts and Q&A

Q: How to service an Air Bag Sensor in the C-Pillar on 2005 Chrysler 300?
A: Before touching the C-pillar mounted side impact sensor, first cut off and isolate the battery negative cable to wait a couple of minutes for the air bag system reserve capacitor to discharge which will help protect you from accidental air bag activation. After that, pull off the C-pillar trim panel, disconnect connector 3 and remove the two screws 2. When attaching the unit, fix the C-pillar mounted impact sensor in place and install the two body mounting screws 2 firmly, tightening them to 7 N.m (62 in.lbs.) After that, refit the electrical connector 3 and clip on the C-pillar trim panel again. Do not connect the battery negative cable until testing the system to avoid any chance of personal injury or death.