OEM 2005 Chrysler Crossfire Fuel Injector

2005 Chrysler Crossfire Fuel Injector Parts and Q&A

• Q: How to Service and Repair a Fuel Injector on 2005 Chrysler Crossfire?

  A: You should begin servicing and fixing the fuel injectors by disconnecting the battery cable and removing the engine cover. After that, remove the screw holding the wiring harness cover and pull off the cover. Unplug the fuel system and remove the engine warning light. Take off the fuel feed line, then unlock the clips around the fuel injector wire harness connector and pull it away from the fuel injectors. Untighten and remove the fuel rail bolts and while moving the fuel rail side to side, lift it slowly out. Take out the fuel injector retaining clips and the fuel injectors from their spots on the fuel rail. Put the fuel injectors into the fuel rail and hold them in place with the retaining clips. Place the fuel rail with the fuel injectors and push it aside, then downward towards the intake manifold. Bolt down the fuel rail and tighten the bolts to 9 N.m. Now, reconnect the fuel injector harness to the fuel injectors and secure the fuel injector electrical connector retaining clips. Reattach the fuel supply line, making sure it's tightened to 38 N.m, then fix the wiring harness cover and its screw and install the engine cover. After that, secure the negative battery cable back in place.