OEM 2005 Chrysler Crossfire Fuel Rail

2005 Chrysler Crossfire Fuel Rail Parts and Q&A

• Q: How to Service and Repair a Fuel Rail on 2005 Chrysler Crossfire?

  A: First, open the engine and wiring harness covers by removing their retaining screw, then lift off the wiring harness cover. You should put a shop towel around the fuel lines to prevent any extra fuel from spilling. Begin by opening the fuel rail service valve to release the fuel pressure and after that detach the fuel feed line at the fuel rail end. Open the clip on each connector and pull the fuel injector harnesses off the fuel injectors. Come next, loosen the connection of the fuel rail bolts from the intake manifold, then switch the rail side to side before lifting it gradually. To install, move the rail side to side and push it gently inward along the intake as you set the fuel injectors, then attach the bolts and tighten to 9 N.m. Afterward, reattach the fuel injector harness and fix it with the retaining clips. At the fuel rail, permanently connect the fuel feed line and tighten it to 38 N.m. Afterwards, add the wiring harness cover and fasten its retaining screw and secure the engine cover as well.