How to Service the Wheelhouse Splash Shield on 2005 Chrysler Crossfire?

You should begin the service by removing the left front wheel and tire from the vehicle. After that, remove the five plastic retainer nuts and screws holding the wheelhouse splash shield and the two retaining screws from the lower rocker panel. When those are finished, remove the splash shield from the car. Once the shield is ready, put it on the vehicle, line up the holes and secure it with the two retaining screws underneath the rocker panel. Then, replace the five plastic nuts and five screws for the wheelhouse splash shield and fix the left front tire and wheel on the car chassis.

OEM 2005 Chrysler Crossfire Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2005 Chrysler Crossfire Fender Liner Part Number: 5098682AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.5 x 15.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Fender Liner Part Number: 5098681AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098681AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire Wheelhouse Parts and Q&A

Q: How to Service the Wheelhouse Splash Shield on 2005 Chrysler Crossfire?
A: You should begin the service by removing the left front wheel and tire from the vehicle. After that, remove the five plastic retainer nuts and screws holding the wheelhouse splash shield and the two retaining screws from the lower rocker panel. When those are finished, remove the splash shield from the car. Once the shield is ready, put it on the vehicle, line up the holes and secure it with the two retaining screws underneath the rocker panel. Then, replace the five plastic nuts and five screws for the wheelhouse splash shield and fix the left front tire and wheel on the car chassis.