How to Service the Wheelhouse RF Splash Shield on 2006 Chrysler Crossfire?

First, remove the right front tire and wheel from your vehicle to access the RF Wheelhouse Splash Shield. After that, remove five of the plastic retainer nuts, five retainer screws and then two retaining screws found on the lower side of the rocker panel. After the other parts are removed, take off the splash shield from the car. Secure the splash shield to the bottom of the rocker panel with the two retaining screws before you close the vehicle. After that, attach the five plastic retainer nuts and five retainer screws to the wheelhouse splash shield and put back on the right front tire and wheel.

OEM 2006 Chrysler Crossfire Wheelhouse

Outer Wheelhouse

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheelhouses found

View related parts
2006 Chrysler Crossfire Fender Liner Part Number: 5098682AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.40 Pounds
- Item Dimensions: 20.5 x 15.4 x 12.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098682AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Fender Liner Part Number: 5098681AA
Product Specifications
- Other Name: Shield - Wheel House; Fender Splash Shield; Shield Wheel House Front Assembly
- Item Weight: 1.80 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5098681AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire Wheelhouse Parts and Q&A

Q: How to Service the Wheelhouse RF Splash Shield on 2006 Chrysler Crossfire?
A: First, remove the right front tire and wheel from your vehicle to access the RF Wheelhouse Splash Shield. After that, remove five of the plastic retainer nuts, five retainer screws and then two retaining screws found on the lower side of the rocker panel. After the other parts are removed, take off the splash shield from the car. Secure the splash shield to the bottom of the rocker panel with the two retaining screws before you close the vehicle. After that, attach the five plastic retainer nuts and five retainer screws to the wheelhouse splash shield and put back on the right front tire and wheel.