How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2005 Chrysler Pacifica?

To service the harmonic balancer and crankshaft pulley, disconnect the negative battery cable, raise the vehicle and remove the right front wheel and accessory drive belt. Use Special Tools to remove and install the crankshaft damper, torque the bolt to 95 Nm, and reassemble the parts.

OEM 2005 Chrysler Pacifica Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Harmonic Balancers found

View related parts
2005 Chrysler Pacifica Crankshaft Pulley Part Number: 4792989AA
Product Specifications
- Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer Puller; Harmonic Balancer; Pulley; Damper Crankshaft
- Item Weight: 5.10 Pounds
- Item Dimensions: 9.4 x 8.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4792989AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, Limited, Touring | 6 Cyl 3.5 L GAS
View related parts
2005 Chrysler Pacifica Crankshaft Pulley Part Number: 4648941AA
Product Specifications
- Other Name: Damper - Crankshaft; Engine Crankshaft Pulley; Harmonic Balancer Puller; Harmonic Balancer; Vibration Damper; Damper Crankshaft
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4648941AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Pacifica Submodels:
- Base, LX | 6 Cyl 3.8 L GAS

2005 Chrysler Pacifica Harmonic Balancer Parts and Q&A

Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2005 Chrysler Pacifica?
A: To service the harmonic balancer and crankshaft pulley, disconnect the negative battery cable, raise the vehicle and remove the right front wheel and accessory drive belt. Use Special Tools to remove and install the crankshaft damper, torque the bolt to 95 Nm, and reassemble the parts.