How to Service Lash Adjusters with Camshafts Installed on 2005 Chrysler PT Cruiser?

For doing in-vehicle hydraulic lash adjusters, start by taking out the cylinder head cover and the rocker arm and for every adjuster, reposition the machine and remove it. If you wish to reuse the adjusters, indicate for each one where it originally went, since they are assembled as a unit. Each adjuster's plunger should move a small amount downward when depressed with the lifter. This means it is half-full of engine oil at minimum and can be installed into the rocker arm and these steps need to be completed for every adjuster before closing the engine with its cylinder head cover.

OEM 2005 Chrysler PT Cruiser Lash Adjuster

Lash Adjuster Lifter

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Lash Adjuster found

View related parts
2005 Chrysler PT Cruiser Valve Lifters Part Number: 4777976AA
$29.19 MSRP: $37.90
You Save: $8.71 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Tappet - Valve Lash; Valve Lifter; Adjuster Valve Lash
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4777976AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler PT Cruiser Submodels:
- Base, Classic, Couture Edition, Dream, Dream Cruiser, GT, LX, Limited, Street Cruiser, Touring | 4 Cyl 2.4 L GAS

2005 Chrysler PT Cruiser Lash Adjuster Parts and Q&A

Q: How to Service Lash Adjusters with Camshafts Installed on 2005 Chrysler PT Cruiser?
A: For doing in-vehicle hydraulic lash adjusters, start by taking out the cylinder head cover and the rocker arm and for every adjuster, reposition the machine and remove it. If you wish to reuse the adjusters, indicate for each one where it originally went, since they are assembled as a unit. Each adjuster's plunger should move a small amount downward when depressed with the lifter. This means it is half-full of engine oil at minimum and can be installed into the rocker arm and these steps need to be completed for every adjuster before closing the engine with its cylinder head cover.