How to Service a Crankshaft Seal on 2005 Chrysler Sebring?

You need to remove the transaxle and the flex plate before handling the main bearing seal for the crankshaft. Insert the curved flat end of the 3/16 screwdriver between the edge of the case and the crankshaft's dust lip, so that the edge does not touch the oil seal surface but could touch the crankshaft edge when you pry the seal out. Check the edge of the crankshaft for any burrs or scratches and clean them using 400 grit sandpaper to avoid doing harm to your engine. The seal should not be lubricated just before installation. Secure Special Tool 6926-1 Seal Guide onto the crankshaft and make sure the seal's lip is facing the crankcase as you set it in place. Slide Special Tool 6926-2 to drive the seal into the block and continue pushing with handle C-4171 until the tool touches the bottom of the block. After the seal is installed, apply Mopar(R) Lock & Seal Adhesive to the bolt threads and tighten the flex plate down to 95 Nm (70 ft. lbs.), lastly reinstalling the transaxle.

OEM 2005 Chrysler Sebring Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Seals found

View related parts
2005 Chrysler Sebring Rear Main Seal Part Number: MD359158
$16.10 MSRP: $25.20
You Save: $9.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft; Engine Crankshaft Seal; Crankshaft Seal; Oil Seal Crankshaft
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.3 x 4.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD359158
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler Sebring Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2005 Chrysler Sebring Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663622
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2005 Chrysler Sebring Crankshaft Seal Parts and Q&A

Q: How to Service a Crankshaft Seal on 2005 Chrysler Sebring?
A: You need to remove the transaxle and the flex plate before handling the main bearing seal for the crankshaft. Insert the curved flat end of the 3/16 screwdriver between the edge of the case and the crankshaft's dust lip, so that the edge does not touch the oil seal surface but could touch the crankshaft edge when you pry the seal out. Check the edge of the crankshaft for any burrs or scratches and clean them using 400 grit sandpaper to avoid doing harm to your engine. The seal should not be lubricated just before installation. Secure Special Tool 6926-1 Seal Guide onto the crankshaft and make sure the seal's lip is facing the crankcase as you set it in place. Slide Special Tool 6926-2 to drive the seal into the block and continue pushing with handle C-4171 until the tool touches the bottom of the block. After the seal is installed, apply Mopar(R) Lock & Seal Adhesive to the bolt threads and tighten the flex plate down to 95 Nm (70 ft. lbs.), lastly reinstalling the transaxle.