How to Service and Repair a Crankshaft Seal on 2004 Chrysler Sebring?

Before working on the crankshaft main bearing seal, first remove the transaxle and the flex plate. Take a 3/16 flat bladed screwdriver and insert it between the dust lip and the case part, so that it does not touch the seam. Before fitting the seal, inspect the edge of the crankshaft and rub it with sandpaper of 400 grit to avoid any potential harm while installing. You don't need to add lubrication to the seal during installation. The Special Tool 6926-1 Seal Guide is put onto the crankshaft before placing the seal over its head so the seal's lip is pointing towards the crankcase. Gently guide Tool E3898 into the block with Special Tool 6926-2, turning the Tool C-4171 until the long portion of the tool fits firmly against the block without pushing the seal past flush. With the seal in place, glue the flex plate bolts with Mopar Lock & Seal Adhesive and fasten them to 95 Nm (70 ft. lbs.), secure the transaxle and start the engine, letting it idle until cool.

OEM 2004 Chrysler Sebring Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 Crankshaft Seals found

View related parts
2004 Chrysler Sebring Rear Main Seal Part Number: MD359158
$16.10 MSRP: $25.20
You Save: $9.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft; Engine Crankshaft Seal; Crankshaft Seal; Oil Seal Crankshaft
- Item Weight: 0.80 Pounds
- Item Dimensions: 4.3 x 4.1 x 0.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD359158
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2004 Chrysler Sebring Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Item Weight: 0.40 Pounds
- Item Dimensions: 0.2 x 2.1 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663618
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 0.7 x 4.6 x 4.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4621939AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Item Weight: 0.50 Pounds
- Item Dimensions: 4.8 x 4.7 x 0.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663625
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
2004 Chrysler Sebring Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Item Weight: 0.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4663622
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2004 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS

2004 Chrysler Sebring Crankshaft Seal Parts and Q&A

Q: How to Service and Repair a Crankshaft Seal on 2004 Chrysler Sebring?
A: Before working on the crankshaft main bearing seal, first remove the transaxle and the flex plate. Take a 3/16 flat bladed screwdriver and insert it between the dust lip and the case part, so that it does not touch the seam. Before fitting the seal, inspect the edge of the crankshaft and rub it with sandpaper of 400 grit to avoid any potential harm while installing. You don't need to add lubrication to the seal during installation. The Special Tool 6926-1 Seal Guide is put onto the crankshaft before placing the seal over its head so the seal's lip is pointing towards the crankcase. Gently guide Tool E3898 into the block with Special Tool 6926-2, turning the Tool C-4171 until the long portion of the tool fits firmly against the block without pushing the seal past flush. With the seal in place, glue the flex plate bolts with Mopar Lock & Seal Adhesive and fasten them to 95 Nm (70 ft. lbs.), secure the transaxle and start the engine, letting it idle until cool.