How to Properly Install a Crankshaft Seal to Avoid Damage on Chrysler Sebring?

Before anything else, wipe away any scratches or dents on the crankshaft with 800-grit emery cloth and use Mopar(R) brake parts cleaner on the crankshaft. After cleaning it with engine oil, put Seal Guide 9509 on the crankshaft. Place the seal on the tool, making certain the seal lip is placed against the crankcase during installation. Using Driver Handle C-4171 and Seal Driver 9706, push the seal into the block until the tool stops. Now, add the flex plate, then set it in place with the washer and attach using new flex plate bolts, tightened to a torque of 95 Nm (70 ft. lbs.). After that, place the transaxle in the vehicle.

How to Remove a Crankshaft Seal on Chrysler Sebring?

Removing the transmission and the flexplate is the first thing to do when replacing the rear crankshaft seal. After that, insert the tip of a 3/16 flat bladed screwdriver into the gap between the dust lip and the case of the crankshaft seal. Use the screwdriver to lift the seal up from its holder by going inside the edge of the dust lip and against the edge of the case. Make sure that the garter spring of the seal has not been placed on the crankshaft.

OEM Chrysler Sebring Crankshaft Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

12 Crankshaft Seals found

View related parts
Chrysler Sebring Rear Main Seal Part Number: MD359158
$16.10 MSRP: $25.20
You Save: $9.10 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft; Engine Crankshaft Seal; Crankshaft Seal; Oil Seal Crankshaft
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chrysler Sebring | Base | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Rear Main Seal Part Number: 5175829AB
$140.38 MSRP: $211.00
You Save: $70.62 (34%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Replaces: 4663622AC, 5175829AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2005-2010 Chrysler Sebring | Base, GTC, LX, Limited, TSi, Touring | 2.7L V6, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Oil Seal, Front Part Number: 4792317AB
$18.27 MSRP: $26.25
You Save: $7.98 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Crankshaft Seal; Front Crank Seal; Timing Cover Assy; Front Main Crankshaft Seal.
- Position: Front
- Replaces: 4792317, 4273275
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Crankshaft Seal, Front Part Number: 2142125000
$3.71 MSRP: $5.45
You Save: $1.74 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Timing Cover Gasket; Timing Cover Seal; Front Crank Seal; Engine Crankshaft Seal; Front Cover Seal; Oil Seal.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Front Crank Seal Part Number: 4663618
$20.20 MSRP: $29.95
You Save: $9.75 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Front; Engine Timing Cover Seal; Timing Cover Gasket; Timing Cover Seal; Front Seal; Crankshaft Oil Front; Engine Crankshaft Seal.
- Position: Front
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2010 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Rear Main Seal Part Number: 4621939AB
$27.24 MSRP: $40.20
You Save: $12.96 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Seal; Seal Rear Main Crankshaft Serviced With Retainer [04663625]; Crankshaft Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006, 1995-1999 Chrysler Sebring | Base, GTC, JX, JXi, LX, Limited, TSi, Touring | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Rear Main Seal Part Number: 5047167AA
$21.57 MSRP: $31.70
You Save: $10.13 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Crankshaft Oil; Engine Crankshaft Seal, Rear; Rear Seal; Seal Crankshaft Oil Rear; Engine Crankshaft Seal; Crankshaft Seal
- Position: Rear
- Replaces: 2144325000
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Rear Main Seal Part Number: 4663625
$32.82 MSRP: $42.24
You Save: $9.42 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Rear Main Crankshaft; Engine Crankshaft Seal, Rear; Rear Main Seal Gasket; Seal Rear Main Crankshaft See Note; Seal Rear Main Crankshaft
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Rear Main Seal Part Number: 4663870AC
$131.33 MSRP: $174.00
You Save: $42.67 (25%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Retainer - Crankshaft Rear Oil; Engine Crankshaft Seal; Crankshaft Seal; Rear Main Seal Retainer; Retainer And Seal Crankshaft Rear Oil
- Position: Rear
- Replaces: 4663870AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Limited | 3.5L V6, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Front Cover Gasket Part Number: 4667438AB
$11.36 MSRP: $16.30
You Save: $4.94 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal - Timing Belt Cover; Timing Cover Gasket; Timing Cover Seal; Seal
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Sebring | LX | 4 Cyl 2.0 L GAS
View related parts
Chrysler Sebring Rear Main Seal Retainer Part Number: 4663622
Product Specifications
- Other Name: Cover - Crankshaft Rear Oil Seal; Retainer Crankshaft Rear Oil Seal
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2005 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Timing Cover Gasket Part Number: 4667340AB
Product Specifications
- Other Name: Seal - Timing Belt Cover; Engine Timing Cover Gasket; Timing Cover Seal; Front Cover Gasket; Inner Gasket; Seal
- Replaces: 4667340
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2002 Chrysler Sebring
- 1995-1999 Chrysler Sebring | LX | 2.0L L4, 4 Cyl 2.0 L GAS

Chrysler Sebring Crankshaft Seal

Choose OEM Crankshaft Seal that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Crankshaft Seal follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

This is a Crankshaft Seal found in Chrysler Sebring models and it is mounted on the front of the vehicle's engine with the primary function of ensuring that it does not allow oil to leak out of the crankcase. Made from a combination of metal and rubber and in round shape, this seal is an important component in providing the lubricant to the engine in a bid to minimize the friction and consequent wearing of the engine parts. However, years down the road a Chrysler Sebring's Crankshaft Seal may go bad which always cause oil dripping and poor performance. The signs of a bad Crankshaft Seal should not be ignored particularly when the automobile has clocked many miles on the register. Crankshaft Seal should be checked on a regular basis and the damaged one should be replaced on time to have a long-lasting efficient engine for the Chrysler Sebring cars.

Chrysler Sebring Crankshaft Seal Parts and Q&A

Crankshaft Seal, Front
2142125000
Q: How to Properly Install a Crankshaft Seal to Avoid Damage on Chrysler Sebring?
A:
Before anything else, wipe away any scratches or dents on the Crankshaft with 800-grit emery cloth and use Mopar(R) brake parts cleaner on the crankshaft. After cleaning it with engine oil, put Seal Guide 9509 on the crankshaft. Place the seal on the tool, making certain the seal lip is placed against the crankcase during installation. Using Driver Handle C-4171 and Seal Driver 9706, push the seal into the block until the tool stops. Now, add the flex plate, then set it in place with the washer and attach using new flex plate bolts, tightened to a torque of 95 Nm (70 ft. lbs.). After that, place the transaxle in the vehicle.
Rear Main Seal
5047167AA
Q: How to Remove a Crankshaft Seal on Chrysler Sebring?
A:
Removing the transmission and the flexplate is the first thing to do when replacing the rear Crankshaft seal. After that, insert the tip of a 3/16 flat bladed screwdriver into the gap between the dust lip and the case of the crankshaft seal. Use the screwdriver to lift the seal up from its holder by going inside the edge of the dust lip and against the edge of the case. Make sure that the garter spring of the seal has not been placed on the crankshaft.