How to Service and Repair an Engine Mount on 2005 Chrysler Sebring?

When servicing the front engine mount, raise the car, then remove the front mount to bracket holder screw. After locking the main tank, bring out the AIR pump and untighten the mounting bolt at the back rear. Take out the front mount vertical bolts and then get rid of the front mount. Set the front mount on the lower radiator crossmember and lightly put the front mount to bracket through bolt in place. Put in the front mount vertical bolts and turn them to a torque of 61 Nm (45 ft. lbs.). Check the engine's position and tighten the central rear through bolt only when it is stable before setting the engine at 75 Nm (55 ft. lbs). Add the AIR pump, then tighten the front horizontal through bolt to 75 Nm (55 ft. lbs.), only after that lower the vehicle.

OEM 2005 Chrysler Sebring Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Engine Mounts found

View related parts
2005 Chrysler Sebring Motor Mount, Driver Side Part Number: 4573775AB
$197.25 MSRP: $254.00
You Save: $56.75 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Left Engine Mount; Torque Strut; Bracket; Transfer Case; Transmission Mount; Side Mount; Side Support; Support; Mount; Support Engine Mount
- Position: Driver Side
- Item Weight: 3.60 Pounds
- Item Dimensions: 7.7 x 5.6 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573775AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Motor Mount, Passenger Side Part Number: 4573773AB
$421.33 MSRP: $601.00
You Save: $179.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Side Mount; Front Mount; Side Support; Support; Mount; Support Engine Mount; Engine Mount
- Position: Passenger Side
- Replaces: 4578001AB
- Item Weight: 3.20 Pounds
- Item Dimensions: 6.9 x 4.3 x 3.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4573773AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Motor Mount Damper Part Number: MR197992
$21.49 MSRP: $27.24
You Save: $5.75 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Isolator; Dynamic Damper; Damper, Engine Mounting Bracket, Front; Damper Engine Mount
- Item Weight: 1.50 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR197992
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Engine Support, Rear Part Number: 4593337AB
$260.37 MSRP: $330.07
You Save: $69.70 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Rear; Engine Mount, Rear; Motor Mount; Rear Mount; Rear Support; Module Engine Support; Engine Mount Bracket; Engine Mount
- Position: Rear
- Item Weight: 3.50 Pounds
- Item Dimensions: 8.2 x 8.1 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593337AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Engine Support, Front Part Number: 4578019AC
Product Specifications
- Other Name: Support - Engine Support; Front Engine Mount Bracket; Rear Engine Mount; Torque Strut.; Front Support; Rear Support; Module Engine Support
- Position: Front
- Replaces: 4578019AB
- Item Weight: 2.90 Pounds
- Item Dimensions: 8.8 x 7.1 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4578019AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
2005 Chrysler Sebring Engine Support, Front Part Number: 4593383AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Front; Engine Mount, Front; Engine Mount Torque Strut; Motor Mount; Front Support; Front Mount; Module Engine Support; Engine Mount Bracket; Engine Mount
- Position: Front
- Replaces: 4593383AA
- Item Weight: 3.30 Pounds
- Item Dimensions: 4.7 x 8.1 x 8.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4593383AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS

2005 Chrysler Sebring Engine Mount Parts and Q&A

Q: How to Service and Repair an Engine Mount on 2005 Chrysler Sebring?
A: When servicing the front engine mount, raise the car, then remove the front mount to bracket holder screw. After locking the main tank, bring out the AIR pump and untighten the mounting bolt at the back rear. Take out the front mount vertical bolts and then get rid of the front mount. Set the front mount on the lower radiator crossmember and lightly put the front mount to bracket through bolt in place. Put in the front mount vertical bolts and turn them to a torque of 61 Nm (45 ft. lbs.). Check the engine's position and tighten the central rear through bolt only when it is stable before setting the engine at 75 Nm (55 ft. lbs). Add the AIR pump, then tighten the front horizontal through bolt to 75 Nm (55 ft. lbs.), only after that lower the vehicle.