How to Service and Repair a Front Engine Mount on Chrysler Sebring?

Start by hoisting the car when changing the front engine mount. After removing the front mount through bolt horizontally and the front mount mounting bolts vertically, put in the front mount. While installing, place the front mount on the lowest radiator brace and then attach the mount to the bracket with a bolt that's not tight. After that, attach the vertical bolts to the front mount and tighten them to 61 Nm (45 ft. lbs.). After that, tighten the horizontal through bolt to 61 Nm (45 ft. lbs.) and lower the vehicle.

How to Install an Engine Mount in the Front on Chrysler Sebring?

Install mount 1 back under the car, followed by the installation of bolts 3 which should be tightened to 47 Nm (35 ft. lbs.). After that, bolt 2 and install mount onto it. Tighten the mount to 47 Nm (35 ft. lbs.). After finishing upper silencer 1, go ahead and fix lower silencer 1 and then lower the car.

OEM Chrysler Sebring Engine Mount

Engine Motor Mount

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

26 Engine Mounts found

View related parts
Chrysler Sebring Mount Brace, Rear Part Number: 4743960AC
$82.65 MSRP: $131.00
You Save: $48.35 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic & Manual Transmission Mount Bracket; Rear Engine Mount Bracket; Motor Mount; Rear Bracket; Bracket Engine Mount
- Position: Rear
- Replaces: 4743960AA, 4743960AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2008 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Rear Mount Part Number: 5085079AD
$180.15 MSRP: $269.00
You Save: $88.85 (34%)
ADD TO CART
Product Specifications
- Other Name: Bushing; Automatic Transmission Mount Insulator; Engine Mount; Motor Mount; Mount Support; Insulator
- Replaces: 5085079AA, 5085079AC, 5085509AB, 5085079AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Motor Mount, Driver Side Part Number: 4573775AB
$197.25 MSRP: $254.00
You Save: $56.75 (23%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Left Engine Mount; Torque Strut; Bracket; Transfer Case; Transmission Mount; Side Mount; Side Support; Support; Mount; Support Engine Mount
- Position: Driver Side
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006, 1996-1997 Chrysler Sebring | Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Transmission Mount, Front Lower Part Number: 5085071AD
$70.69 MSRP: $108.00
You Save: $37.31 (35%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing - Transmission Mount; Automatic; Engine Torque Strut; Transfer Case; Motor Mount; Side Mount; Mount Bushing; Isolator
- Position: Front Lower
- Replaces: 5085071AB, 5085071AA, 5085071AC, 5085483AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Front Mount, Lower Part Number: 5085078AD
$49.82 MSRP: $73.25
You Save: $23.43 (32%)
ADD TO CART
Product Specifications
- Other Name: Bushing - Isolator; Automatic Transmission Mount; Engine Mounts; Torque Strut; Mount Bracket.; Isolator
- Position: Front Lower
- Replaces: 5085078AA, 5085502AB, 5085078AB, 5085078AC
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Motor Mount, Passenger Side Part Number: 4573773AB
$421.33 MSRP: $601.00
You Save: $179.67 (30%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount, Right; Engine Mount Torque Strut; Engine Mount Bracket; Side Mount; Front Mount; Side Support; Support; Mount; Support Engine Mount; Engine Mount
- Position: Passenger Side
- Replaces: 4578001AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2006 Chrysler Sebring | Base, GTC, JX, JXi, LX, LXi, Limited, TSi, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Motor Mount Damper Part Number: MR197992
$21.49 MSRP: $27.24
You Save: $5.75 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator - Engine Mount; Engine Mount Isolator; Dynamic Damper; Damper, Engine Mounting Bracket, Front; Damper Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chrysler Sebring | LX, LXi, Limited | 6 Cyl 2.5 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Engine Support Part Number: 4593337AF
$86.59 MSRP: $109.77
You Save: $23.18 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Motor Mount; Rear Mount; Module; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Engine Support Part Number: 4593410
$168.31 MSRP: $213.36
You Save: $45.05 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Motor Mount; Support; Module; Screw/Washer, Right Engine Mount; Module, Engine Support; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-1998 Chrysler Sebring | JX, JXi | 2.5L V6, 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Engine Support, Rear Part Number: 4593337AB
$260.37 MSRP: $330.07
You Save: $69.70 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Rear; Engine Mount, Rear; Motor Mount; Rear Mount; Rear Support; Module Engine Support; Engine Mount Bracket; Engine Mount
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2001-2006 Chrysler Sebring | Base, GTC, LX, LXi, Limited, TSi, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Support Bracket Part Number: 4593436AB
$60.62 MSRP: $69.55
You Save: $8.93 (13%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bracket - Engine Mount; Transmission Mount Bracket; Side Mount; Front Bracket
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Side Mount Part Number: 5105450AB
$206.21 MSRP: $308.00
You Save: $101.79 (34%)
Product Specifications
- Other Name: Insulator; Engine Mount Isolator; Bushing; Torque Strut; Bracket; Motor Mount; Mount Insulator; Engine Mount Right; Isolator
- Replaces: 5105450AA, 5085082AB, 5085082AA, 5085492AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 2.4L L4, 2.7L V6, 4 Cyl 2.4 L GAS
View related parts
Chrysler Sebring Front Mount Part Number: 4593410AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket; Engine Mount Bushing; Motor Mount; Rear Mount; Module; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1997-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Mount Bracket Part Number: 5085075AD
Product Specifications
- Other Name: Bracket - Engine Mount; Engine Mount Bracket; Motor Mount; Bracket Engine Mount
- Replaces: 5085075AC, 5085075AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2009-2010 Chrysler Sebring | LX, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
- 2007 Chrysler Sebring | 2.7L V6
View related parts
Chrysler Sebring Engine Support, Rear Part Number: 4578020AB
Product Specifications
- Other Name: Support - Engine Support; Engine Mount Bracket, Rear; Engine Mount, Rear; Motor Mount; Rear Support; Module Engine Support
- Position: Rear
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2003-2004 Chrysler Sebring | Base, GTC, LX, LXi, Limited, Touring | 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.0 L GAS
View related parts
Chrysler Sebring Mount Brace Part Number: 5085074AE
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic & Manual Transmission Mount; Engine Torque Strut Mount; Motor Mount; Bracket Engine Mount
- Replaces: 5085074AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2008-2010 Chrysler Sebring | LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS
View related parts
Chrysler Sebring Mount Bracket Part Number: 5085517AE
Product Specifications
- Other Name: Bracket - Engine Mount; Automatic & Manual Transmission Mount Bracket; Motor Mount; Mount Brace; Rear Bracket; Bracket Engine Mount
- Replaces: 5085517AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 2007-2010 Chrysler Sebring | Base, LX, Limited, Touring | 4 Cyl 2.4 L GAS, 6 Cyl 2.7 L FLEX, 6 Cyl 2.7 L GAS, 6 Cyl 3.5 L GAS
View related parts
Chrysler Sebring Transmission Mount Stopper Part Number: MB911549
Product Specifications
- Other Name: Insulator Engine Mount; Transfer Case Mount; Transmission Mount; Stopper, Transmission Mounting; Plate Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1995-1999 Chrysler Sebring | LX, LXi | 4 Cyl 2.0 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Transmission Mount Part Number: 4668135AB
Product Specifications
- Other Name: Support - Engine Mount; Engine Mount Torque Strut; Engine Mount Bracket; Transfer Case Mount; Motor Mount; Side Support; Support Engine Mount
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1996-2000 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS
View related parts
Chrysler Sebring Front Mount Part Number: 4593338AC
Product Specifications
- Other Name: Support - Engine Support; Module; Module Engine Support
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following Vehicles:
- 1998 Chrysler Sebring | JX, JXi | 4 Cyl 2.4 L GAS, 6 Cyl 2.5 L GAS

| Page 1 of 2 |Next >

1-20 of 26 Results

Chrysler Sebring Engine Mount

Choose OEM Engine Mount that meet Chrysler factory standards. Chrysler designs and tests every component for precision and durability. Each Engine Mount follows strict manufacturing steps to lock in quality and fit. If your Chrysler Sebring matters to you, OEM parts make the smart choice. You'll get the exact look, feel, and performance you expect. Shop genuine Sebring parts at the highly competitive prices online. Enjoy a manufacturer's warranty, a hassle-free return policy, and rapid delivery. No more guesswork with off brands. Get genuine parts with exact fit and true factory performance. Shop with confidence today at JeepPartsDeal.com.

The Engine Mount in Chrysler Sebring vehicles serves two primary functions: It reduces noise and vibration from the engine and locates as well as supports the engine and transaxle within the chassis. Comfort is central to this isolation while the position and orientation of the engine are important in ensuring safety and to avoid physical destruction. Throughout the evolution of Chrysler Sebring vehicles they have been outfitted with different Engine Mounts such as simple rubber mounts, fluid filled hydraulic mounts, and most recently electronic active mounts. The traditional type contacts include metal parts placed in between rubber spacer while the hydraulic type reduces vibration. Maintenance active mounts are able to change their rigidity in relation with the number of revolutions per minute produced by the engine. These Engine Mounts degrade over time, under extreme heat and if exposed to fluids, which manifest in odd noise and vibration, thus requiring a check in, or replacement.

Chrysler Sebring Engine Mount Parts and Q&A

Motor Mount, Driver Side
4573775AB
Q: How to Service and Repair a Front Engine Mount on Chrysler Sebring?
A:
Start by hoisting the car when changing the front engine mount. After removing the front mount through bolt horizontally and the front mount mounting bolts vertically, put in the front mount. While installing, place the front mount on the lowest radiator brace and then attach the mount to the bracket with a bolt that's not tight. After that, attach the vertical bolts to the front mount and tighten them to 61 Nm (45 ft. lbs.). After that, tighten the horizontal through bolt to 61 Nm (45 ft. lbs.) and lower the vehicle.
Transmission Mount, Front Lower
5085071AD
Q: How to Install an Engine Mount in the Front on Chrysler Sebring?
A:
Install mount 1 back under the car, followed by the installation of bolts 3 which should be tightened to 47 Nm (35 ft. lbs.). After that, bolt 2 and install mount onto it. Tighten the mount to 47 Nm (35 ft. lbs.). After finishing upper silencer 1, go ahead and fix lower silencer 1 and then lower the car.