How to Maintain and Fix a Release Bearing on 2005 Chrysler Sebring?

To service the clutch release bearing and clutch release lever, remove the transaxle. Remove the lever from the pivot stud without using tools so that it does not become damaged. Inspect bearing, replace if noisy or dry. Check and replace broken pivot stud spring clips Lubricate prior to reassembling and reinstall the transaxle.

OEM 2005 Chrysler Sebring Release Bearing

Clutch Release Throw Out Bearing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Release Bearings found

View related parts
2005 Chrysler Sebring Release Bearing Part Number: MD722744
$20.15 MSRP: $25.54
You Save: $5.39 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Clutch Release; Clutch Release Bearings; Clutch Release Bearing; Clutch Kit; Bearing, Clutch Release, Q Engine, 4/5 Speed Transmission; K Engine 4/5 Speed Transmission.
- Item Weight: 0.90 Pounds
- Item Dimensions: 3.5 x 3.6 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MD722744
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Sebring Submodels:
- Base | 4 Cyl 2.4 L GAS
View related parts
2005 Chrysler Sebring Release Bearing Part Number: MR145619
$84.40 MSRP: $106.99
You Save: $22.59 (22%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bearing - Clutch Release; Clutch Release Bearing; Clutch Kit; Bearing Clutch Release
- Item Weight: 1.00 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: MR145619
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
Fits the following 2005 Chrysler Sebring Submodels:
- LX, LXi, Limited | 6 Cyl 3.0 L GAS

2005 Chrysler Sebring Release Bearing Parts and Q&A

Q: How to Maintain and Fix a Release Bearing on 2005 Chrysler Sebring?
A: To service the clutch release bearing and clutch release lever, remove the transaxle. Remove the lever from the pivot stud without using tools so that it does not become damaged. Inspect bearing, replace if noisy or dry. Check and replace broken pivot stud spring clips Lubricate prior to reassembling and reinstall the transaxle.