Other Name: Latch - Rear Door; Rear Left Door Latch Assembly; Lock Actuator Motor; Lock Actuator.; Latch
Position: Rear Driver Side
Replaces: 55364985AA, 55364111AC, 55364111AB
Item Weight: 1.50 Pounds
Item Dimensions: 6.2 x 3.8 x 4.0 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55364985AB
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Adventurer, Limited, Limited Hybrid, SE, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 5.7 L GAS
2005 Dodge Durango Door Latch Assembly Parts and Q&A
Q: How to Service and Repair a Front Door Latch Assembly on 2005 Dodge Durango?
A: Remove the watershield as the first step in service or repair to the front door latch. Following this, pull out bolt 3 and unscrew nut 2 and place the rear glass run channel 1 as a side. Before taking out the latch, unscrew the latch screws 5, pull away the actuator rods 3 and take the electrical connectors 6 out of the latch. Install the latch into the door and link back the electrical connector 6 and the actuator rod 3. Consumate the installation by installing screws and tightening them to 10 N.m (85 in.lbs.), then set the latch to the best position. Move the rear glass run channel, place the nut and bolt inside and tighten the fasteners to 8 N.m (70 in.lbs.), then put the watershield back in place.