How to Service and Repair a Fuse Box on 2005 Dodge Durango?

Before working on the fuse block, disconnect and separate the battery's negative wire. After that, get rid of the cowl trim cover and take out the three mounting screws. Go ahead and unplug the electrical harness harnesses and take out the Junction Block (1). You need to link up the wire harness connectors with the Junction Block (JB) (1), position the JB and connect the three screws to finish the installation. Reattach the cowl trim cover and then insert the negative terminal of the battery.

OEM 2005 Dodge Durango Fuse Box

Fuse Holder Box

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuse Box found

View related parts
2005 Dodge Durango Distribution Box Part Number: 4692013AE
Product Specifications
- Other Name: Block; Fuse Box
- Replaces: 4692013AC, 4692013AD
- Item Weight: 3.40 Pounds
- Item Dimensions: 14.2 x 10.9 x 7.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4692013AE
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
- Limited, SLT, ST, SXT | 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS

2005 Dodge Durango Fuse Box Parts and Q&A

Q: How to Service and Repair a Fuse Box on 2005 Dodge Durango?
A: Before working on the fuse block, disconnect and separate the battery's negative wire. After that, get rid of the cowl trim cover and take out the three mounting screws. Go ahead and unplug the electrical harness harnesses and take out the Junction Block (1). You need to link up the wire harness connectors with the Junction Block (JB) (1), position the JB and connect the three screws to finish the installation. Reattach the cowl trim cover and then insert the negative terminal of the battery.