Other Name: Regulator - Front Door Window; Window Regulator, Front Right
Position: Front Passenger Side
Replaces: 55362206AB
Item Weight: 5.80 Pounds
Item Dimensions: 27.2 x 12.6 x 3.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 55362206AC
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Durango Submodels:
Adventurer, Limited, SLT, ST, SXT | 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.7 L GAS
2005 Dodge Durango Window Regulator Parts and Q&A
Q: How to Maintain a Window Regulator for the Rear Door on 2005 Dodge Durango?
A: Before servicing the rear door window regulator, take away the watershield first. Attach the window switch to the door temporarily and place the window glass so you can reach the regulator nuts. Take out the nuts and make sure the glass stays up in the socket by adding a wood wedge or alternative. After that, take out the bolts that secure the regulator to the door panel, loosen the remaining bolts, pull the regulator away from the panel and disconnect the electrical cord. Always put the regulator in place at the entrance and plug the electrical connector into it. Insert the regulator bolts into the keyhole slots, then line them up and tighten them to 9 N.m. Next, lay the glass on the door regulator, screw in the nuts tightly to 9 N.m and finally, attach the watershield.