OEM 2005 Dodge Magnum Spoiler

2005 Dodge Magnum Spoiler Parts and Q&A

• Q: How to Safely Detach and Attach a Rear Spoiler on 2005 Dodge Magnum?

  A: First, disconnect your car's negative battery cable and remove the lift gate upper piece of trim before removing the rear spoiler. After that, remove the rear washer fluid hose and separate the Chmsl wire harness from the connector. Unscrew the nuts holding the rear spoiler to the rear window and give the spoiler enough slack to reach the wire kit and washer fluid supply tube. Get rid of the rubber grommet on the lift gate's top right, then take the wire harness and the washer supply hose through the hole in the liftgate. After that, remove the rear spoiler from the truck. To install, fit the rear spoiler to the car, run the wire harness and the rear washer fluid supply hose through the cut in the liftgate and set the grommet into place. Set the rear spoiler onto the liftgate, then fasten it with nuts installed securely on both sides. After that, reattach the connector between the Chmsl wire harness and the washer fluid hose, install the liftgate upper trim panel back and you're done with the negative battery cable.