Other Name: Control - A/C And Heater; HVAC Temperature Control Panel; Climate Control Module; Blower Control Switch; Control Assembly; Dash Control Unit; Control A/C And Heater
Item Weight: 1.40 Pounds
Item Dimensions: 10.7 x 6.3 x 6.4 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 4885336AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Neon Submodels:
ACR, Base, ES, High Line, R/T, SE, SRT-4, SXT | 4 Cyl 2.0 L GAS, 4 Cyl 2.4 L GAS
2005 Dodge Neon A/C Switch Parts and Q&A
Q: How to Service and Repair the A/C Switch on 2005 Dodge Neon?
A: Start by taking out the bezel from the instrument panel center stack and removing the center air duct. After that, remove the screws connecting the control to the instrument panel and remove the control. Take out the vacuum harness, control harness and wire harness from the A/C-heater control. To install, join the vacuum harness, both control cables and wire harness at the back of the A/C-heater control after adjusting the temperature and mode cables. Once the reinstalled, tighten the screws to 2.3 Nm (20 in. lbs.), put back the center air duct, then install the center stack bezel in the instrument panel.