How to Identify and Service a Fuel Pump Relay in a 2005 Dodge Ram 1500?

The fuel pump relay is located in the Power Distribution Center (PDC) and its position is made evident by the label stuck on the PDC cover. The first step is to remove PDC cover and then remove relay from PDC. Check the condition of the relay terminals and condition of the PDC connector terminals for damage and corrosion, making repairs as needed and reinstalling the relay. In addition, verify that the pin height is the same across terminals of PDC connector, if necessary, repair. After putting the relay back into the PDC, place the PDC cover back on.

OEM 2005 Dodge Ram 1500 Fuel Pump Relay

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Fuel Pump Relay found

View related parts
2005 Dodge Ram 1500 Fuel Pump Relay, Rear Part Number: 4727370AA
$26.96 MSRP: $39.90
You Save: $12.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Relay - Mini; PCM Relay; Fan Relay; Accessory Relay(F/R); A/C Clutch; Starter; Fog Light; Fan Relay; Blower Motor Relay; Oxygen Sensor Relay; Mini 5 Terminal Square Relay.
- Position: Rear
- Replaces: 56006707, 56006709, 4848879AB, 4638094, 68369406AA, 68223712AA
- Item Weight: 0.50 Pounds
- Item Dimensions: 1.3 x 1.4 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 4727370AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
- Base, Laramie, SLT, SRT-10, ST, SXT, Sport, TRX4, WS | 10 Cyl 8.3 L GAS, 3.7L V6, 4.7L V8, 5.7L V8, 6 Cyl 3.7 L GAS, 6 Cyl 3.9 L GAS, 8 Cyl 4.7 L FLEX, 8 Cyl 4.7 L GAS, 8 Cyl 5.2 L CNG, 8 Cyl 5.2 L GAS, 8 Cyl 5.7 L GAS, 8 Cyl 5.9 L GAS, 8.3L V10

2005 Dodge Ram 1500 Fuel Pump Relay Parts and Q&A

Q: How to Identify and Service a Fuel Pump Relay in a 2005 Dodge Ram 1500?
A: The fuel pump relay is located in the Power Distribution Center (PDC) and its position is made evident by the label stuck on the PDC cover. The first step is to remove PDC cover and then remove relay from PDC. Check the condition of the relay terminals and condition of the PDC connector terminals for damage and corrosion, making repairs as needed and reinstalling the relay. In addition, verify that the pin height is the same across terminals of PDC connector, if necessary, repair. After putting the relay back into the PDC, place the PDC cover back on.