Other Name: Sensor - Oxygen; Oxygen Sensor, Front Left, Rear, Rear Left; Rear Oxygen Sensor; Front Oxygen Sensor; Sensor Oxygen
Position: Front Driver Side
Item Weight: 0.60 Pounds
Item Dimensions: 20.4 x 2.0 x 1.3 inches
Condition: New
Fitment Type: Direct Replacement
SKU: 56028997AA
Warranty: This genuine part is guaranteed by Mopar's
factory warranty.
More Info
Fits the following 2005 Dodge Ram 1500 Submodels:
Laramie, SLT, SRT-10, ST | 10 Cyl 8.3 L GAS, 8 Cyl 5.7 L GAS
2005 Dodge Ram 1500 Oxygen Sensor Parts and Q&A
Q: How to Maintain an Oxygen Sensor on 2005 Dodge Ram 1500?
A: Before working on the oxygen sensor, ensure the engine is not hot to avoid being harmed by the hot manifold, pipes and converter. Hold up the vehicle, disconnect the O2S sensor's wire connector and be sure to not directly tug at the wire when you disconnect it. To remove the sensor, connect your O2 removal tool and use the correct tap to clean the threads inside the exhaust pipe. Because the threads on the O2S sensor are already covered with anti-seize compound, do not add any more before installing. Set the O2S sensor at 30 Nm (22 ft. lbs.) using the torque wrench, then link the O2S sensor wire to its connector and then drop the vehicle by lifting the support safely.