How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2005 Dodge Ram 3500?

Before servicing or repairing the harmonic balancer and crankshaft pulley, get rid of the accessory drive belt. Once that's done, remove the four damper to crankshaft bolts and then carefully lift out the damper and speed indicator ring. Check the damper hub for any splits and change it if you notice any. Make sure there isn't any wear on the rubber in the damper and that the index lines on the hub and inertia member are no more than 1.59 mm apart, otherwise replace the damper. Start by sitting the speed indicator ring over the dowel pin, add the crankshaft damper and connect with the bolts, finishing with tightening to 40 Nm plus an additional 60°. Put the damper in place so the hole matches the dowel pin and next put back the accessory drive belt.

OEM 2005 Dodge Ram 3500 Harmonic Balancer

Engine Harmonic Balancer

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Harmonic Balancers found

View related parts
2005 Dodge Ram 3500 Vibration Damper Part Number: 5086735AA
$788.21 MSRP: $1090.00
You Save: $301.79 (28%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer; Damper Crankshaft
- Item Weight: 16.70 Pounds
- Item Dimensions: 12.7 x 11.5 x 3.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5086735AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, Sport, TRX4 | 6 Cyl 5.9 L DIESEL
View related parts
2005 Dodge Ram 3500 Vibration Damper Part Number: 53021303AA
Product Specifications
- Other Name: Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Item Weight: 8.30 Pounds
- Item Dimensions: 10.6 x 10.5 x 5.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021303AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, SXT | 8 Cyl 5.7 L GAS
View related parts
2005 Dodge Ram 3500 Vibration Damper Part Number: 53021303AD
Product Specifications
- Other Name: Damper - Crankshaft; Harmonic Balancer Puller; Harmonic Balancer; Crankshaft Damper; Damper Crankshaft
- Replaces: 53021303BA
- Item Weight: 8.30 Pounds
- Item Dimensions: 11.6 x 10.5 x 6.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 53021303AD
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Ram 3500 Submodels:
- Laramie, SLT, ST, Sport | 8 Cyl 5.7 L GAS

2005 Dodge Ram 3500 Harmonic Balancer Parts and Q&A

Q: How to Service and Repair a Harmonic Balancer and Crankshaft Pulley on 2005 Dodge Ram 3500?
A: Before servicing or repairing the harmonic balancer and crankshaft pulley, get rid of the accessory drive belt. Once that's done, remove the four damper to crankshaft bolts and then carefully lift out the damper and speed indicator ring. Check the damper hub for any splits and change it if you notice any. Make sure there isn't any wear on the rubber in the damper and that the index lines on the hub and inertia member are no more than 1.59 mm apart, otherwise replace the damper. Start by sitting the speed indicator ring over the dowel pin, add the crankshaft damper and connect with the bolts, finishing with tightening to 40 Nm plus an additional 60°. Put the damper in place so the hole matches the dowel pin and next put back the accessory drive belt.