How to Service and Repair the ABS Control Module for Antilock Brakes on 2005 Dodge Sprinter 2500?

When servicing or repairing the HCU, make sure to put the unit straight up. First, take the ground wire from the battery and remember to have the ignition turned off while doing so. After that, unplug the multiplug from the control module and take off the brake lines from the hydraulic control unit, mark each line so you can reassemble them properly and seal the connections. Take out the hydraulic control unit from the position on the bracket and check the rubber mounts while doing so. If they look damaged, put in new ones. While putting in the hydraulic control unit, slip it into the rubber mounts, attach the brake lines and tighten them to 16 Nm (142 inch lbs.). Connect the multiplug back to the control module and ground the battery using the cable. Following installation, bleed the brakes, check the brake fluid tank and replace or top up the level if needed.

OEM 2005 Dodge Sprinter 2500 ABS Control Module

Anti Lock Brake Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 ABS Control Modules found

View related parts
2005 Dodge Sprinter 2500 Modulator Valve Part Number: 5127538AA
$2156.43 MSRP: $3465.00
You Save: $1308.57 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note; Control Unit Anti-Lock Brake
- Replaces: 5129374AA
- Item Weight: 7.00 Pounds
- Item Dimensions: 8.8 x 7.9 x 7.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5127538AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Sprinter 2500 Submodels:
- Base | 2.7L L5, 5 Cyl 2.7 L DIESEL
View related parts
2005 Dodge Sprinter 2500 Control Module Part Number: 5161052AA
Product Specifications
- Other Name: Module - ABS; ABS Control Module; Module; Module Anti-Lock Brakes See Note
- Item Weight: 2.20 Pounds
- Item Dimensions: 6.6 x 5.0 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161052AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2005 Dodge Sprinter 2500 Modulator Valve Part Number: 5161051AA
Product Specifications
- Other Name: Module - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note
- Item Weight: 1.00 Pounds
- Item Dimensions: 8.9 x 9.0 x 8.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5161051AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL
View related parts
2005 Dodge Sprinter 2500 Modulator Valve Part Number: 5140695AB
Product Specifications
- Other Name: Control - Anti-Lock Brake; ABS Hydraulic Assembly; ABS Control Module; ABS Control Unit; Control Unit Anti-Lock Brake See Note
- Item Weight: 4.20 Pounds
- Item Dimensions: 8.9 x 8.0 x 8.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5140695AB
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Dodge Sprinter 2500 Submodels:
- Base | 5 Cyl 2.7 L DIESEL

2005 Dodge Sprinter 2500 ABS Control Module Parts and Q&A

Q: How to Service and Repair the ABS Control Module for Antilock Brakes on 2005 Dodge Sprinter 2500?
A: When servicing or repairing the HCU, make sure to put the unit straight up. First, take the ground wire from the battery and remember to have the ignition turned off while doing so. After that, unplug the multiplug from the control module and take off the brake lines from the hydraulic control unit, mark each line so you can reassemble them properly and seal the connections. Take out the hydraulic control unit from the position on the bracket and check the rubber mounts while doing so. If they look damaged, put in new ones. While putting in the hydraulic control unit, slip it into the rubber mounts, attach the brake lines and tighten them to 16 Nm (142 inch lbs.). Connect the multiplug back to the control module and ground the battery using the cable. Following installation, bleed the brakes, check the brake fluid tank and replace or top up the level if needed.