How to Maintain the Door Lock Switch on 2005 Jeep Liberty?

To start, remove and isolate the negative side battery terminal before doing anything else. Following that, take out the door trim panel and separate the electrical harness from the switch. Push the door trim panel gently and remove the switch from it. To set up the electronic module, insert the switch and then link the electrical harness connector. When that is done, put the door trim panel back and attach the negative battery cable again.

OEM 2005 Jeep Liberty Door Lock Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Door Lock Switch found

View related parts
2005 Jeep Liberty Lock Switch, Front Part Number: 56010695AA
Product Specifications
- Other Name: Switch - Door Lock; Door Lock Switch, Front; Switch Door Lock; Door Lock Switch
- Position: Front
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.8 x 2.6 x 1.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 56010695AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Jeep Liberty Submodels:
- 65th Anniversary Edition, Limited, Renegade, Rocky Mountain Edition, Sport | 4 Cyl 2.4 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.7 L GAS

2005 Jeep Liberty Door Lock Switch Parts and Q&A

Q: How to Maintain the Door Lock Switch on 2005 Jeep Liberty?
A: To start, remove and isolate the negative side battery terminal before doing anything else. Following that, take out the door trim panel and separate the electrical harness from the switch. Push the door trim panel gently and remove the switch from it. To set up the electronic module, insert the switch and then link the electrical harness connector. When that is done, put the door trim panel back and attach the negative battery cable again.