How to Remove and Install an A/C Hose in a Refrigerant System on 2006 Chrysler Crossfire?

First, take out the negative battery cable, then drain the refrigerant from your refrigerant system. Following this, unscrew the retainer nut from the first part of the expansion valve, slide both lines off their studs and pull the lines out of the expansion valve's clip. Hold up the car, taking care to support it and then take out the bolts from the compressor and the connecting line and assembly from the vehicle. Make sure the plumbing for refrigerant is free from kinks and sharp bends and bend the lines at least ten times the hose diameter. The flexible hose should also remain 80 millimeters (3 inches) away from the exhaust manifold during installation. Once you're sure the connections are tight and do not leak, attach the suction line to the compressor and tighten the mounting bolt to a torque of 23 N.m (18 ft. lbs.), then install the A/C compressor bolts. Slide both the suction line and liquid line over the expansion valve stud and fix the fastener to 10 N.m (88 in. lbs.). After that, attach the negative battery cable, release all remaining refrigerant and add more refrigerant to the system.

OEM 2006 Chrysler Crossfire A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2006 Chrysler Crossfire Suction Hose Part Number: 5099344AA
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction Compressor To H - Block
- Item Weight: 1.60 Pounds
- Item Dimensions: 18.9 x 4.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Discharge Hose Part Number: 5099342AA
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge Compressor To Condenser
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.8 x 2.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099342AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire A/C Line Part Number: 5099062AA
Product Specifications
- Other Name: Line - Receiver/Drier To Expansion; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Line Receiver/Drier To Expansion Valve
- Item Weight: 0.80 Pounds
- Item Dimensions: 37.0 x 6.4 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099062AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Hose & Tube Assembly Part Number: 5099060AA
Product Specifications
- Other Name: Line - Expansion Valve To Compress; A/C Manifold Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Line Expansion Valve To Compressor
- Item Weight: 1.00 Pounds
- Item Dimensions: 18.4 x 1.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2006 Chrysler Crossfire Liquid Line Part Number: 5099059AA
Product Specifications
- Other Name: Line - Condenser To Receiver/Drier; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Line Condenser To Receiver/Drier
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.9 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2006 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2006 Chrysler Crossfire A/C Hose Parts and Q&A

Q: How to Remove and Install an A/C Hose in a Refrigerant System on 2006 Chrysler Crossfire?
A: First, take out the negative battery cable, then drain the refrigerant from your refrigerant system. Following this, unscrew the retainer nut from the first part of the expansion valve, slide both lines off their studs and pull the lines out of the expansion valve's clip. Hold up the car, taking care to support it and then take out the bolts from the compressor and the connecting line and assembly from the vehicle. Make sure the plumbing for refrigerant is free from kinks and sharp bends and bend the lines at least ten times the hose diameter. The flexible hose should also remain 80 millimeters (3 inches) away from the exhaust manifold during installation. Once you're sure the connections are tight and do not leak, attach the suction line to the compressor and tighten the mounting bolt to a torque of 23 N.m (18 ft. lbs.), then install the A/C compressor bolts. Slide both the suction line and liquid line over the expansion valve stud and fix the fastener to 10 N.m (88 in. lbs.). After that, attach the negative battery cable, release all remaining refrigerant and add more refrigerant to the system.