How to Replace an A/C Hose in an HVAC System for Suction Hose on 2005 Chrysler Crossfire?

Before doing any replacements, take out the negative battery cable and recover the refrigerant from the system. Pull off the nut on the expansion valve, loosen and slide the suction and liquid lines off their studs and finally remove the lines from the clip. Relieve the pressure, lift and support the vehicle, remove the bolts from the compressor and the suction line and then take out the suction line assembly on the vehicle. When installing, don't allow any sharp bends or kinks in the refrigerant plumbing; minimum bend radius should be ten times hose diameter and flexible hose lines should be 80 millimeters (3 inches) from the exhaust manifold. Make sure all leaks have been sealed and tightened, then install the suction line to the compressor and tighten its bolt to 23 Nm (18 ft. lbs.) immediately after followed by the A/C compressor bolts. Guide the suction line and liquid line up the valve stud, put the cap on and tighten the nut to 10 Nm (88 in. lbs.). Following that, put the negative battery terminal back on, draw out the refrigerant and charge the refrigerant system.

OEM 2005 Chrysler Crossfire A/C Hose

Air Conditioning Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

5 A/C Hoses found

View related parts
2005 Chrysler Crossfire Suction Hose Part Number: 5099344AA
Product Specifications
- Other Name: Line - A/C Suction; A/C Refrigerant Liquid Hose; A/C Hose; Suction Line; Line A/C Suction Compressor To H - Block
- Item Weight: 1.60 Pounds
- Item Dimensions: 18.9 x 4.6 x 2.3 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099344AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Discharge Hose Part Number: 5099342AA
Product Specifications
- Other Name: Line - A/C Discharge; A/C Refrigerant Discharge Hose; A/C Refrigerant Liquid Hose; A/C Hose; Discharge Line; Line A/C Discharge Compressor To Condenser
- Item Weight: 0.90 Pounds
- Item Dimensions: 17.8 x 2.9 x 2.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099342AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire A/C Line Part Number: 5099062AA
Product Specifications
- Other Name: Line - Receiver/Drier To Expansion; A/C Refrigerant Liquid Hose; A/C Hose; Liquid Line; Line Receiver/Drier To Expansion Valve
- Item Weight: 0.80 Pounds
- Item Dimensions: 37.0 x 6.4 x 5.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099062AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Hose & Tube Assembly Part Number: 5099060AA
Product Specifications
- Other Name: Line - Expansion Valve To Compress; A/C Manifold Hose Assembly; A/C Refrigerant Liquid Hose; A/C Hose; Line Expansion Valve To Compressor
- Item Weight: 1.00 Pounds
- Item Dimensions: 18.4 x 1.2 x 4.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099060AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS
View related parts
2005 Chrysler Crossfire Liquid Line Part Number: 5099059AA
Product Specifications
- Other Name: Line - Condenser To Receiver/Drier; A/C Refrigerant Liquid Hose; A/C Hose; A/C Tube; Line Condenser To Receiver/Drier
- Item Weight: 0.60 Pounds
- Item Dimensions: 13.9 x 1.6 x 1.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 5099059AA
- Warranty: This genuine part is guaranteed by Mopar's factory warranty.
More Info
Fits the following 2005 Chrysler Crossfire Submodels:
- Base, Limited, SRT-6 | 6 Cyl 3.2 L GAS

2005 Chrysler Crossfire A/C Hose Parts and Q&A

Q: How to Replace an A/C Hose in an HVAC System for Suction Hose on 2005 Chrysler Crossfire?
A: Before doing any replacements, take out the negative battery cable and recover the refrigerant from the system. Pull off the nut on the expansion valve, loosen and slide the suction and liquid lines off their studs and finally remove the lines from the clip. Relieve the pressure, lift and support the vehicle, remove the bolts from the compressor and the suction line and then take out the suction line assembly on the vehicle. When installing, don't allow any sharp bends or kinks in the refrigerant plumbing; minimum bend radius should be ten times hose diameter and flexible hose lines should be 80 millimeters (3 inches) from the exhaust manifold. Make sure all leaks have been sealed and tightened, then install the suction line to the compressor and tighten its bolt to 23 Nm (18 ft. lbs.) immediately after followed by the A/C compressor bolts. Guide the suction line and liquid line up the valve stud, put the cap on and tighten the nut to 10 Nm (88 in. lbs.). Following that, put the negative battery terminal back on, draw out the refrigerant and charge the refrigerant system.